| View previous topic :: View next topic |
| Author |
Message |
Tech Support
Joined: 25 Aug 2003
Posts: 4407
|
 Posted: Thu Nov 13, 2008 11:51 am Post subject: |
 |
|
The thing is, if it worked before you unplugged the modem, there's no reason it shouldn't work after you plugged it back in unless something changed in Windows. We don't know if it's with the COM port, the driver, or something else but something that isn't PageGate changed.
This may sound a little radical but you could try using the System Restore or GoBack to restore the system to the day before the modem stopped responding?
|
|
| Back to top |
|
mickm3
Joined: 06 Oct 2008
Posts: 18
|
| Posted: Thu Nov 13, 2008 12:08 pm Post subject: |
|
|
Hiya,
I have just managed to send a message through the Phone modem from Hyperterminal using the following commands
ATZ<CR>
AT+CMGF=1<CR>
AT+CSCS="GSM"<CR>
AT+CMGS="0876407133"<CR><test><CTRL+Z>
Then I start the Pagegate services and it is giving the Database error: 3219 invalid operation
|
|
| Back to top |
|
mickm3
Joined: 06 Oct 2008
Posts: 18
|
| Posted: Thu Nov 13, 2008 12:10 pm Post subject: |
|
|
I just managed to send a message through the cellular from hyperterminal using the following commands
ATZ<CR>
AT+CMGF=1<CR>
AT+CSCS="GSM"<CR>
AT+CMGS="0876407133"<CR><test><CTRL+Z>
But still getting the database error when I try to send from Pagegate.
|
|
| Back to top |
|
OzCom
Joined: 22 Oct 2003
Posts: 1123
Location: US
|
| Posted: Thu Nov 13, 2008 12:12 pm Post subject: |
|
|
HyperTerminal does not access the COM port the same way that Windows applications do
Have you tried using VBTerm?_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
| Back to top |
|
mickm3
Joined: 06 Oct 2008
Posts: 18
|
| Posted: Fri Nov 14, 2008 12:33 pm Post subject: |
|
|
Hello,
I have got it working now. Thanks for all your help.
|
|
| Back to top |
|
OzCom
Joined: 22 Oct 2003
Posts: 1123
Location: US
|
| Posted: Fri Nov 14, 2008 12:57 pm Post subject: |
|
|
Just out of curiosity - what was the issue?_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
| Back to top |
|
mickm3
Joined: 06 Oct 2008
Posts: 18
|
| Posted: Mon Nov 17, 2008 4:06 am Post subject: |
|
|
I re-installed the Connectivity cable drivers and also one of my colleagues had installed other modem software on the box as well while I was out of the office on holidays and I did not know about that. So I removed that as well and then after it started to work.
Thanks again for all your help.
|
|
| Back to top |
|
|
