View previous topic :: View next topic |
Author |
Message |
vjose
Joined: 09 Sep 2008 Posts: 10 Location: Stockton, CA
|
Posted: Wed Sep 24, 2008 4:41 pm Post subject: Verizon Tap Settings |
|
|
Is anyone using a TAP setting for paging to Verizon devices? If so what are the settings you are using? Tried the settings provided on Verizon's website but we're not getting anything.
|
|
Back to top |
|
Tech Support
Joined: 25 Aug 2003 Posts: 4354
|
Posted: Thu Sep 25, 2008 7:47 am Post subject: |
|
|
Try using this terminal number: 8668230501
1200 baud, even parity, 7 data bits, 1 stop bit |
|
Back to top |
|
vjose
Joined: 09 Sep 2008 Posts: 10 Location: Stockton, CA
|
Posted: Thu Sep 25, 2008 9:36 am Post subject: |
|
|
those are the settings I'm am currently using
|
|
Back to top |
|
OzCom
Joined: 22 Oct 2003 Posts: 1121 Location: US
|
Posted: Thu Sep 25, 2008 9:55 am Post subject: |
|
|
What are you using for ID/PIN?
The TAP number given is for the Verizon CELLULAR phones, and expects the phone's 10digit# as ID. Verizon is in the process of phasing out TAP access to the cellular network, you may want to consider some of the alternatives_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
Back to top |
|
Tech Support
Joined: 25 Aug 2003 Posts: 4354
|
Posted: Thu Sep 25, 2008 10:27 am Post subject: |
|
|
hmm.. if you would, post your connection log so we can see what happened when you tried the communication. Here's what you'll want to do:
1) Go to View - Dialer Log.
2) Click on the Clipboard button.
3) Bring up a reply post.
4) Make sure your cursor is in the body of the message and hit Ctrl+V on your keyboard.
Post that, if you would. |
|
Back to top |
|
vjose
Joined: 09 Sep 2008 Posts: 10 Location: Stockton, CA
|
Posted: Thu Sep 25, 2008 10:57 am Post subject: |
|
|
9/25/2008 8:49:32 AM ========================================
9/25/2008 8:49:32 AM Start connection to carrier: verizon-tap
9/25/2008 8:49:32 AM Connect using TAP protocol
9/25/2008 8:49:32 AM Setting communication parameters (1200,e,7,1)
9/25/2008 8:49:40 AM Module Started
9/25/2008 8:49:43 AM Time synchronized with scheduler
9/25/2008 8:49:48 AM Log ping...
9/25/2008 8:49:54 AM Log ping...
9/25/2008 8:50:04 AM Log ping...
9/25/2008 8:50:12 AM ========================================
9/25/2008 8:50:12 AM Start connection to carrier: verizon-tap
9/25/2008 8:50:12 AM Connect using TAP protocol
9/25/2008 8:50:12 AM Setting communication parameters (1200,e,7,1)
9/25/2008 8:50:22 AM Module Started
9/25/2008 8:50:23 AM Time synchronized with scheduler
|
|
Back to top |
|
OzCom
Joined: 22 Oct 2003 Posts: 1121 Location: US
|
Posted: Thu Sep 25, 2008 11:53 am Post subject: |
|
|
Under settings, make sure Direct Connect is NOT checked_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
Back to top |
|
Tech Support
Joined: 25 Aug 2003 Posts: 4354
|
Posted: Thu Sep 25, 2008 11:56 am Post subject: |
|
|
Also, what COM port is your modem installed to? |
|
Back to top |
|
|