| View previous topic :: View next topic |
| Author |
Message |
SEMI
Guest
|
 Posted: Fri Nov 21, 2003 5:27 pm Post subject: Carrier will answer but software does not see a connection |
 |
|
| When using NotePager32, the carrier number is dialed and the carrier line answers but NotePager does not see a connection to the carrier and times out and disconnects. I have verified that the carrier number is correct. I am out of ideas of what to do. Can anyone help?
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4407
|
| Posted: Mon Nov 24, 2003 10:34 am Post subject: Carrier will answer but software does not see a connectio |
|
|
The most common problems with communications is having an improper init string. Can you please post the following information:
1. The make and model of your modem
2. The init string you are currently using (on the carrier setup screen)
3. The phone number you are using
4. The communication settings (i.e. baud, parity, databits, etc.) from the carrier setup screen.
5. The version of Windows you are running.
6. The version of NotePager 32 you are running.
Thanks.
|
|
| Back to top |
|
Kojak1007
Guest
|
| Posted: Tue Feb 03, 2004 5:04 am Post subject: I didn't post this but mine is doing ths |
|
|
Here is the info you requested:
1.GTW.V92 Voicemodem
2.AT&FQ0V1X4&D2N0+MS=V22,0
3.4178635998
4.Protocol: Tap
Baud Rate: I've tried it at 1200 and 300
Parity: Even
Data Bits: 7
Stop Bits: 1
Max Char: 240
5.Windows XP Home
6.Ver 3.0
Again I did not post this question but I am having this problem. Could you help me out. Thanks
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4407
|
| Posted: Tue Feb 03, 2004 7:24 am Post subject: I didn't post this but mine is doing ths |
|
|
Try this init string with your baud set to 300:
AT&FQ0V1X4&D2N0+MS=B103,0
|
|
| Back to top |
|
Kojak1007
Guest
|
| Posted: Tue Feb 03, 2004 9:43 pm Post subject: |
|
|
| That did it!! Thanks so much for your help!!!!!
|
|
| Back to top |
|
|
