| View previous topic :: View next topic |
| Author |
Message |
Kyleweir@lehighcounty.org
Joined: 15 Dec 2024
Posts: 5
|
 Posted: Fri Mar 21, 2025 9:03 am Post subject: Sending txt via specific connector |
 |
|
I have two connectors setup, with one carrier..so for 95% of the emails this works great.
The other 5% I want to be able to send a text from one or the other of the connector specifically.
It's be great if their was a powershell module or something similar.. or even a pagegate cli that I could do this with.
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4381
|
| Posted: Fri Mar 21, 2025 9:14 am Post subject: |
|
|
To double check, are you currently using anything in the 'Dedicated Carrier' value for either connector?
To check, open PG Admin and go to Connectors - Connector # - Settings. |
|
| Back to top |
|
Kyleweir@lehighcounty.org
Joined: 15 Dec 2024
Posts: 5
|
| Posted: Fri Mar 21, 2025 12:05 pm Post subject: |
|
|
| Tech Support wrote: |
To double check, are you currently using anything in the 'Dedicated Carrier' value for either connector?
To check, open PG Admin and go to Connectors - Connector # - Settings. |
Neither connector is set to dedicated carrier.
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4381
|
| Posted: Fri Mar 21, 2025 2:57 pm Post subject: |
|
|
It's a manual option at the moment but if you want, you could specify a dedicated carrier for one connector or the other to force it to send SMS as you want.
Can you give us a bit of information about the 5% scenarios? |
|
| Back to top |
|
Kyleweir@lehighcounty.org
Joined: 15 Dec 2024
Posts: 5
|
| Posted: Fri Mar 21, 2025 5:31 pm Post subject: |
|
|
| Tech Support wrote: |
It's a manual option at the moment but if you want, you could specify a dedicated carrier for one connector or the other to force it to send SMS as you want.
Can you give us a bit of information about the 5% scenarios? |
So the 5% is basically we have this one app which passes info out to some employee phones, because of the info they want it all to come from one phone number.. i can have it run a script/exe with it appending the phone#, and msg (I've tested it with smtp using powershell and it works but it goes from both numbers.. )
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4381
|
| Posted: Mon Mar 24, 2025 8:59 am Post subject: |
|
|
You may want to add a third connector to PageGate, then create a new carrier for the messages that are triggered from your app and tie its' settings to one of the cell gateways, then new recipients tied to the new carrier.
You could then dedicate Connector 3 to the special carrier for that app's messages to guarantee they'll only ever go out through the specified device. |
|
| Back to top |
|
|
