NotePage, Inc. Forum Index

Pagegate v7 to Zetron 2100 TAP - Pages work but no ACK

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support
View previous topic :: View next topic  
Author Message
lawco911



Joined: 07 Jul 2016
Posts: 9
Location: New Castle, pA

PostPosted: Tue Aug 02, 2016 9:33 am    Post subject: Pagegate v7 to Zetron 2100 TAP - Pages work but no ACK Reply with quote

We are successfully sending pages via TAP from Pagegate v7 to a Zetron 2100 terminal.

It appears that the "Acknowledgement" handshake isnt occuring...pagegate sends the message, the Zetron terminal sends the page, but then it doesnt appear to respond that "all is ok".

Then it sends the page (successfully) 2 more times (according to Pagegate's global settings) and then reports that it has failed (even though it worked 3 times). I've attached logs below.

Is there a way in pagegate to edit the "ack" settings? Or is this a Zetron terminal thing?

Thanks,

BRM
----------


8/2/2016 12:00:27 AM Module Started (v7.0.23)
8/2/2016 12:00:30 AM Time synchronized with scheduler
8/2/2016 10:17:01 AM ========================================
8/2/2016 10:17:01 AM Start connection to carrier: Zetron
8/2/2016 10:17:01 AM Connect using TAP protocol
8/2/2016 10:17:01 AM Setting communication parameters (300,e,7,1)
8/2/2016 10:17:01 AM Connected to carrier
8/2/2016 10:17:01 AM Waiting for protocol initialization
8/2/2016 10:17:01 AM Sent:<CR>
8/2/2016 10:17:01 AM Received:ID=
8/2/2016 10:17:01 AM TAP protocol detected
8/2/2016 10:17:01 AM Sent:<ESC>PG1<CR>
8/2/2016 10:17:02 AM Received:<ACK><CR><ESC>
8/2/2016 10:17:02 AM Received:[p<CR>
8/2/2016 10:17:02 AM Automatic TAP mode accepted
8/2/2016 10:17:02 AM ----------------------------------------
8/2/2016 10:17:02 AM Working on message to: test_zetron from:
8/2/2016 10:17:02 AM Formatting message
8/2/2016 10:17:02 AM Message contained in single packet
8/2/2016 10:17:02 AM Message contained in single block
8/2/2016 10:17:02 AM Sending block
8/2/2016 10:17:02 AM Sent:<STX>1234<CR>:<CR><ETX>123<CR>
8/2/2016 10:17:22 AM Received:<ACK><CR>
8/2/2016 10:17:22 AM No response from carrier. Disconnecting
8/2/2016 10:17:22 AM Sent:<EOT><CR>
8/2/2016 10:17:57 AM ========================================
8/2/2016 10:17:57 AM Start connection to carrier: Zetron
8/2/2016 10:17:57 AM Connect using TAP protocol
8/2/2016 10:17:57 AM Setting communication parameters (300,e,7,1)
8/2/2016 10:17:57 AM Connected to carrier
8/2/2016 10:17:57 AM Waiting for protocol initialization
8/2/2016 10:17:57 AM Sent:<CR>
8/2/2016 10:17:57 AM Received:ID=
8/2/2016 10:17:57 AM TAP protocol detected
8/2/2016 10:17:57 AM Sent:<ESC>PG1<CR>
8/2/2016 10:17:58 AM Received:<ACK>
8/2/2016 10:17:58 AM Received:<CR><ESC>[p<CR>
8/2/2016 10:17:58 AM Automatic TAP mode accepted
8/2/2016 10:17:58 AM ----------------------------------------
8/2/2016 10:17:58 AM Working on message to: test_zetron from:
8/2/2016 10:17:58 AM Formatting message
8/2/2016 10:17:58 AM Message contained in single packet
8/2/2016 10:17:58 AM Message contained in single block
8/2/2016 10:17:58 AM Sending block
8/2/2016 10:17:58 AM Sent:<STX>4511<CR>:<CR><ETX>124<CR>
8/2/2016 10:18:18 AM Received:<ACK><CR>
8/2/2016 10:18:18 AM No response from carrier. Disconnecting
8/2/2016 10:18:18 AM Sent:<EOT><CR>
8/2/2016 10:18:23 AM ========================================
8/2/2016 10:18:23 AM Start connection to carrier: Zetron
8/2/2016 10:18:23 AM Connect using TAP protocol
8/2/2016 10:18:23 AM Setting communication parameters (300,e,7,1)
8/2/2016 10:18:23 AM Connected to carrier
8/2/2016 10:18:23 AM Waiting for protocol initialization
8/2/2016 10:18:23 AM Sent:<CR>
8/2/2016 10:18:24 AM Received:ID=
8/2/2016 10:18:24 AM TAP protocol detected
8/2/2016 10:18:24 AM Sent:<ESC>PG1<CR>
8/2/2016 10:18:24 AM Received:<ACK>
8/2/2016 10:18:24 AM Received:<CR><ESC>[p<CR>
8/2/2016 10:18:24 AM Automatic TAP mode accepted
8/2/2016 10:18:24 AM ----------------------------------------
8/2/2016 10:18:24 AM Working on message to: test_zetron from:
8/2/2016 10:18:24 AM Formatting message
8/2/2016 10:18:24 AM Message contained in single packet
8/2/2016 10:18:24 AM Message contained in single block
8/2/2016 10:18:24 AM Sending block
8/2/2016 10:18:25 AM Sent:<STX>4511<CR>:<CR><ETX>124<CR>
8/2/2016 10:18:45 AM Received:<ACK><CR>
8/2/2016 10:18:45 AM No response from carrier. Disconnecting
8/2/2016 10:18:45 AM Sent:<EOT><CR>
8/2/2016 10:18:50 AM ========================================
8/2/2016 10:18:50 AM Start connection to carrier: Zetron
8/2/2016 10:18:50 AM Connect using TAP protocol
8/2/2016 10:18:50 AM Setting communication parameters (300,e,7,1)
8/2/2016 10:18:50 AM Connected to carrier
8/2/2016 10:18:50 AM Waiting for protocol initialization
8/2/2016 10:18:50 AM Sent:<CR>
8/2/2016 10:18:50 AM Received:ID=
8/2/2016 10:18:50 AM TAP protocol detected
8/2/2016 10:18:50 AM Sent:<ESC>PG1<CR>
8/2/2016 10:18:51 AM Received:<ACK><CR><ESC>[
8/2/2016 10:18:51 AM Received:p<CR>
8/2/2016 10:18:51 AM Automatic TAP mode accepted
8/2/2016 10:18:51 AM ----------------------------------------
8/2/2016 10:18:51 AM Working on message to: test_zetron from:
8/2/2016 10:18:51 AM Formatting message
8/2/2016 10:18:51 AM Message contained in single packet
8/2/2016 10:18:51 AM Message contained in single block
8/2/2016 10:18:51 AM Sending block
8/2/2016 10:18:51 AM Sent:<STX>4511<CR>:<CR><ETX>124<CR>
8/2/2016 10:19:11 AM Received:<ACK><CR>
8/2/2016 10:19:11 AM No response from carrier. Disconnecting
8/2/2016 10:19:11 AM Sent:<EOT><CR>
8/2/2016 10:19:11 AM Carrier retry limit reached. Marking pending messages as bad
8/2/2016 10:19:11 AM FAILED Stn:0 To:test_zetron Msg:
8/2/2016 10:19:11 AM FAILED Stn:0 To:test_zetron Msg:
8/2/2016 10:20:52 AM Module Stopped
8/2/2016 10:20:59 AM Module Started (v7.0.23)
8/2/2016 10:21:02 AM Time synchronized with scheduler
8/2/2016 10:21:17 AM ========================================
8/2/2016 10:21:17 AM Start connection to carrier: Zetron
8/2/2016 10:21:17 AM Connect using TAP protocol
8/2/2016 10:21:17 AM Setting communication parameters (300,e,7,1)
8/2/2016 10:21:17 AM Connected to carrier
8/2/2016 10:21:17 AM Waiting for protocol initialization
8/2/2016 10:21:17 AM Sent:<CR>
8/2/2016 10:21:18 AM Received:ID=
8/2/2016 10:21:18 AM TAP protocol detected
8/2/2016 10:21:18 AM Sent:<ESC>PG1<CR>
8/2/2016 10:21:18 AM Received:<ACK><CR><ESC>
8/2/2016 10:21:19 AM Received:[p<CR>
8/2/2016 10:21:19 AM Automatic TAP mode accepted
8/2/2016 10:21:19 AM ----------------------------------------
8/2/2016 10:21:19 AM Working on message to: test_zetron from:
8/2/2016 10:21:19 AM Formatting message
8/2/2016 10:21:19 AM Message contained in single packet
8/2/2016 10:21:19 AM Message contained in single block
8/2/2016 10:21:19 AM Sending block
8/2/2016 10:21:19 AM Sent:<STX>4511<CR>:<CR><ETX>124<CR>
8/2/2016 10:21:39 AM Received:<ACK><CR>
8/2/2016 10:21:39 AM No response from carrier. Disconnecting
8/2/2016 10:21:39 AM Sent:<EOT><CR>
8/2/2016 10:22:14 AM ========================================
8/2/2016 10:22:14 AM Start connection to carrier: Zetron
8/2/2016 10:22:14 AM Connect using TAP protocol
8/2/2016 10:22:14 AM Setting communication parameters (300,e,7,1)
8/2/2016 10:22:14 AM Connected to carrier
8/2/2016 10:22:14 AM Waiting for protocol initialization
8/2/2016 10:22:14 AM Sent:<CR>
8/2/2016 10:22:14 AM Received:ID=
8/2/2016 10:22:14 AM TAP protocol detected
8/2/2016 10:22:14 AM Sent:<ESC>PG1<CR>
8/2/2016 10:22:15 AM Received:<ACK><CR><ESC>
8/2/2016 10:22:15 AM Received:[p<CR>
8/2/2016 10:22:15 AM Automatic TAP mode accepted
8/2/2016 10:22:15 AM ----------------------------------------
8/2/2016 10:22:15 AM Working on message to: test_zetron from:
8/2/2016 10:22:15 AM Formatting message
8/2/2016 10:22:15 AM Message contained in single packet
8/2/2016 10:22:15 AM Message contained in single block
8/2/2016 10:22:15 AM Sending block
8/2/2016 10:22:15 AM Sent:<STX>4511<CR>:<CR><ETX>124<CR>
8/2/2016 10:22:35 AM Received:<ACK><CR>
8/2/2016 10:22:35 AM No response from carrier. Disconnecting
8/2/2016 10:22:35 AM Sent:<EOT><CR>
8/2/2016 10:23:10 AM ========================================
8/2/2016 10:23:10 AM Start connection to carrier: Zetron
8/2/2016 10:23:10 AM Connect using TAP protocol
8/2/2016 10:23:10 AM Setting communication parameters (300,e,7,1)
8/2/2016 10:23:10 AM Connected to carrier
8/2/2016 10:23:10 AM Waiting for protocol initialization
8/2/2016 10:23:10 AM Sent:<CR>
8/2/2016 10:23:11 AM Received:ID=
8/2/2016 10:23:11 AM TAP protocol detected
8/2/2016 10:23:11 AM Sent:<ESC>PG1<CR>
8/2/2016 10:23:11 AM Received:<ACK>
8/2/2016 10:23:11 AM Received:<CR><ESC>[p<CR>
8/2/2016 10:23:11 AM Automatic TAP mode accepted
8/2/2016 10:23:11 AM ----------------------------------------
8/2/2016 10:23:11 AM Working on message to: test_zetron from:
8/2/2016 10:23:11 AM Formatting message
8/2/2016 10:23:11 AM Message contained in single packet
8/2/2016 10:23:11 AM Message contained in single block
8/2/2016 10:23:11 AM Sending block
8/2/2016 10:23:12 AM Sent:<STX>4511<CR>:<CR><ETX>124<CR>
8/2/2016 10:23:32 AM Received:<ACK><CR>
8/2/2016 10:23:32 AM No response from carrier. Disconnecting
8/2/2016 10:23:32 AM Sent:<EOT><CR>
8/2/2016 10:24:07 AM ========================================
8/2/2016 10:24:07 AM Start connection to carrier: Zetron
8/2/2016 10:24:07 AM Connect using TAP protocol
8/2/2016 10:24:07 AM Setting communication parameters (300,e,7,1)
8/2/2016 10:24:07 AM Connected to carrier
8/2/2016 10:24:07 AM Waiting for protocol initialization
8/2/2016 10:24:07 AM Sent:<CR>
8/2/2016 10:24:07 AM Received:ID=
8/2/2016 10:24:07 AM TAP protocol detected
8/2/2016 10:24:07 AM Sent:<ESC>PG1<CR>
8/2/2016 10:24:08 AM Received:<ACK><CR><ESC>[
8/2/2016 10:24:08 AM Received:p<CR>
8/2/2016 10:24:08 AM Automatic TAP mode accepted
8/2/2016 10:24:08 AM ----------------------------------------
8/2/2016 10:24:08 AM Working on message to: test_zetron from:
8/2/2016 10:24:08 AM Formatting message
8/2/2016 10:24:08 AM Message contained in single packet
8/2/2016 10:24:08 AM Message contained in single block
8/2/2016 10:24:08 AM Sending block
8/2/2016 10:24:08 AM Sent:<STX>4511<CR>:<CR><ETX>124<CR>
8/2/2016 10:24:28 AM Received:<ACK><CR>
8/2/2016 10:24:28 AM No response from carrier. Disconnecting
8/2/2016 10:24:28 AM Message retry limit reached
8/2/2016 10:24:28 AM FAILED Stn:0 To:test_zetron Msg:
8/2/2016 10:24:28 AM Sent:<EOT><CR>
8/2/2016 10:24:28 AM Carrier retry limit reached. Marking pending messages as bad


Back to top
View user's profile
OzCom



Joined: 22 Oct 2003
Posts: 1121
Location: US

PostPosted: Tue Aug 02, 2016 9:40 am    Post subject: Reply with quote

300 baud? Try it at 1200 or 2400



_________________
Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate
Back to top
View user's profile Send e-mail Visit poster's website AIM Address Yahoo Messenger MSN Messenger
lawco911



Joined: 07 Jul 2016
Posts: 9
Location: New Castle, pA

PostPosted: Tue Aug 02, 2016 9:53 am    Post subject: Reply with quote

Thanks for the reply. Those were my thoughts exactly, but all of the ones i've seen on the forum as well as a neighboring county are all using 300 baud, so i assume that's what the terminal is set for. i even upgraded my commodore 64 computer's modem from 300 to 1200 baud back in the day.

it doesnt work with different settings just in pagegate...(doesnt send the page or even complete the handshake process)...i guess I could see if the setting can be changed in the Zetron, but do you think it would make a difference with the acknowledgement?


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Tue Aug 02, 2016 9:58 am    Post subject: Reply with quote

This is something we're beginning to see more often. According to the standards for the TAP protocol, the responding system must pass a CR (carriage return) before the ACK (Acknowledgement response). Technically, not passing the <CR> before the <ACK> isn't following the TAP specification but this is the third terminal we've interacted with in the last two months that isn't following the specification quite like it should.

So, pursuant to that, we've built a new connector executable that will look for and accept either the properly formatted <CR><ACK><CR> or the improperly formatted <ACK><CR>. Here's what you'll want to do:

1) Download the new connector executable here: http://www.notepage.net/download/dev/pgdial1.exe

2) Open the PG Admin.

3) Expand the Connectors section.

4) Right click on Connector 1, left click on Stop.

5) Copy the file you downloaded in step 1 and paste it in to the PageGate program directory.
5a) When prompted, you do want to overwrite the file.

6) Back in the PG Admin, right click on Connector 1, left click on Start.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
lawco911



Joined: 07 Jul 2016
Posts: 9
Location: New Castle, pA

PostPosted: Tue Aug 02, 2016 10:19 am    Post subject: SOLVED Reply with quote

Thanks (Tech Support)..replacing the pgdial1.exe file with the updated version appeared to fix it.

Thank you for your prompt reply!


Back to top
View user's profile
OzCom



Joined: 22 Oct 2003
Posts: 1121
Location: US

PostPosted: Tue Aug 02, 2016 11:26 am    Post subject: Reply with quote

We need a "Like" button for this forum! :-)



_________________
Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate
Back to top
View user's profile Send e-mail Visit poster's website AIM Address Yahoo Messenger MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> PageGate Support All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin