NotePage, Inc. Forum Index

Integration with DTMF page message from intrusion alarm

 
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> Integration Related Questions
View previous topic :: View next topic  
Author Message
philiphart



Joined: 10 Oct 2010
Posts: 2

PostPosted: Sun Oct 10, 2010 4:02 pm    Post subject: Integration with DTMF page message from intrusion alarm Reply with quote

How can I integrate an automated DTMF page message which was intended to dial a dedicated pager (like in the old days) into NotePager Pro? The automated message consists of a phone number and a coded numerical message describing the alarm event. An SMS message on my cell phone is the goal.

If NotePager Pro is not the best way to do this, suggestions are welcome.

The carrier is Verizon


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Mon Oct 11, 2010 9:03 am    Post subject: Reply with quote

Well, it can't really be done with NotePager Pro but it can be done with PageGate. You could use PageGate's GetTouchTone module to monitor a modem and phone line. Then, when PageGate received the DTMF signals, it would key offo f them to deliver an SMS out to the Verizon device in question.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
philiphart



Joined: 10 Oct 2010
Posts: 2

PostPosted: Tue Oct 12, 2010 8:40 am    Post subject: Reply with quote

Thanks. Nice solution. Unfortunately a little pricey - PageGate plus the DTMF module - for a single pager non-corporate application.


Back to top
View user's profile
NotePage Sales
Site Admin


Joined: 23 Apr 2004
Posts: 265

PostPosted: Tue Oct 12, 2010 11:36 am    Post subject: Reply with quote

I understand this is more than what you want to spend. For what is needed and the capabilities provided, PageGate software isn't too costly. Pricing is at http://www.notepage.net/pricing.htm

Download a free trial at http://www.notepage.net/software.htm



_________________
NotePage Sales
Back to top
View user's profile Visit poster's website
marty



Joined: 30 Mar 2013
Posts: 3

PostPosted: Sat Mar 30, 2013 8:29 am    Post subject: Reply with quote

I want to do the same thing.

What is the GetTouchTone module? What does it look like?

$150 for PageGate software
$100 for Touchtone Receiver
Am I understanding the prices correctly?


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Mon Apr 01, 2013 7:21 am    Post subject: Reply with quote

The GetTouchTone module is a module for PageGate that allows the program to monitor a modem for incoming calls, then listen in for any touchtones that are received. This does require a modem with the Voice capability because standard DataFax modems cannot interpret inbound DTMF tones.

As for what the module looks like, you can run a demo version of the module by executing the PGTTReceiver.exe in the PageGate program directory. The PGTTReceiver.exe is controlled by the pggttone.ini file, so you'll want to open the pggttone.ini and configure it first based on the directions within the file.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
marty



Joined: 30 Mar 2013
Posts: 3

PostPosted: Mon Apr 01, 2013 9:58 am    Post subject: Reply with quote

Tech Support,
Thanks for the reply. Now I am starting to understand. Module is software.

My computer operating system is Windows 7 Ultimate, Service Pack 1

Here is a link to the specifications of my modem.
http://www.zoomtel.com/graphics/datasheets/dial_up/3030_29211_spec.pdf
Copy and paste.
Zoom
Model 3030
V.92 PCI Softmodem
Specifications
Data Speeds - 56,000 bps receive/48,000 bps send with auto-negotiation of V.92 and V.90**
- 300 to 33,600 bps with support for all international and Bell standards
Fax Speeds - 300 to 14,400 bps, Group 3, Class 1
Standards Supported - Data: V.92, V.90, V.34, V.32bis, V.32, V.23, V.22bis, V.22A/B, V.22, V.21,
Bell 103/212A
- Compression: V.44, V.42bis, MNP5
- Error control: V.42, MNP 2-4
- Hayes AT and extended AT command sets
- V.80 for H.324 (videophone) compatibility
Dialing - Supports programmable duration DTMF (touchtone)
- Call progress tone detection (dialtones, busy, ring, etc.)
Video Support - V.80 (required for point-to-point H.324 video over standard phone lines)
Additional Features - Can be easily updated with software
- Voice mail with multiple private mailboxes, password protection, remote retrieval
and easy message review (requires soundcard)
- Plug-and-Play for automatic configuration with Windows 98SE, Me, 2000, XP,
Vista, 7
- 2 telephone jacks (RJ-11)
Regulatory Approvals - FCC Parts 15B and 68
- Industry Canada CS-03
- CE
- CSA (North American Safety Testing)
- RoHS Lead-free compliant
Physical Specifications - Height with bracket: 4.75 inches (12.1 cm), Width: 4.8 inches (12.2 cm)
Thickness: .8 inches (2.1 cm)
Warranty - Two Years

Will this hardware work with your software?

Want my computer to receive a automated telephone call from a security system that is programed to send a page to a pager. [DTMF page message] This should trigger the software to send a email containing the numeric page numbers or a custom message.

There will be one designated phone line into the modem of the computer in my house.

I see eight separate Interfaces on your PageGate Order Form. What do I need to purchase to receive Touch-Tone (via voicemodem) Inbound Message and send SMTP (email via Internet) Outbound Message?


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Mon Apr 01, 2013 10:03 am    Post subject: Reply with quote

Unfortunately, according to the specification of your modem, it doesn't have the Voice option required to receive DTMF signals. You would need to get a modem that supports that to use it with the GetTouchTone module.

Quote:
I see eight separate Interfaces on your PageGate Order Form. What do I need to purchase to receive Touch-Tone (via voicemodem) Inbound Message and send SMTP (email via Internet) Outbound Message?


You would need PageGate with the GetAscii and GetTouchTone modules and a Recipient license equal to the number of Recipients you want to send messages to.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
marty



Joined: 30 Mar 2013
Posts: 3

PostPosted: Mon Apr 08, 2013 10:31 am    Post subject: Reply with quote

Can your PageGate software receive messages from a alarm panel in Contact ID format? Think a handshake or kiss off signal is needed.

Here is some data information copied from DSC PC1832 alarm panel installation instructions.

Appendix F: Communicator Format Options
01 20 BPS, 1400 HZ handshake
02 20 BPS, 2300 HZ handshake
03 DTMF CONTACT I.D.
04 SIA FSK
05 Pager
06 Residential Dial
07 10 BPS, 1400 Hz handshake
08 10 BPS, 2300 Hz handshake
09 For Future Use
10 For Future Use
11 For Future Use
12 For Future Use
13 For Future Use


Back to top
View user's profile
Tech Support



Joined: 25 Aug 2003
Posts: 4351

PostPosted: Mon Apr 08, 2013 11:27 am    Post subject: Reply with quote

I'm not immediately familiar with the Contact ID format... is it trying to dial out to transmit DTMF signals? If so, you should be able to use PageGate's GetTouchTone module to monitor a modem for those incoming calls, yes.



_________________
Tech Support
support@notepage.com
http://www.notepage.net
Back to top
View user's profile
NotePage Sales
Site Admin


Joined: 23 Apr 2004
Posts: 265

PostPosted: Mon Apr 08, 2013 12:38 pm    Post subject: Reply with quote

You can download a free trial of PageGate software: http://www.notepage.net/software.htm



_________________
NotePage Sales
Back to top
View user's profile Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    NotePage, Inc. Forum Index -> Integration Related Questions All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin