| View previous topic :: View next topic |
| Author |
Message |
m21crx
Joined: 08 Dec 2009
Posts: 10
|
 Posted: Tue Dec 08, 2009 7:52 am Post subject: SMS GSM SPEED !!! I NEED MORE SPEED !!!!! |
 |
|
Hey guys
Iv been playing around with notepager pro and thinking of buying it but I have a concern over the speed it takes to send messages.
For each sms it sends it does a attempting to reset modem command which takes 10 to 12 seconds.
Is there anyway of removing this re set modem command which occurs every time you try and send a sms ? as when you use the software to send a few sms’s out quickly the delay is very annoying
On a side note I tried using this software with a wavecom serial GSM modem and had no luck, I had to swap to a GSM USB 3G modem and it worked fine…. I tried and tried and tried to make the wavecom GSM modem work but it just wouldn’t work… it ie just would keep doing a sent AT <CR> again.. and again… like lots of people have reported …. (yet AT commands work perfectly in hyper terminal)
Anyway if you know of a GSM device that can send SMS quickly or how to fine tune the notepager pro software please let me know ASAP
Kindest Regards
M21
|
|
| Back to top |
|
OzCom
Joined: 22 Oct 2003
Posts: 1121
Location: US
|
| Posted: Tue Dec 08, 2009 9:09 am Post subject: |
|
|
Upgrade to PageGate - we have many satisfied PageGate customers using Cellular modems (GSM and CDMA). We're seeing a typical session in under 6 seconds
(NOTE: Much of the issue you are describing is attributed to the USB to COM port driver issue - a known problem in MS Windows based machines.)_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
| Back to top |
|
m21crx
Joined: 08 Dec 2009
Posts: 10
|
| Posted: Tue Dec 08, 2009 4:02 pm Post subject: |
|
|
Der OzCom
What native Com port GSM / Cellular Modem do you recommend ? i hear you talk about MultiModem but which model ?
As my current wavecom modem just won't work....
Kindest Regards
|
|
| Back to top |
|
OzCom
Joined: 22 Oct 2003
Posts: 1121
Location: US
|
| Posted: Tue Dec 08, 2009 4:35 pm Post subject: |
|
|
We use many of the MTCBA series. They are available for CDMA and GSM networks as well as USB, Serial, and Ethernet connectivity._________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
| Back to top |
|
m21crx
Joined: 08 Dec 2009
Posts: 10
|
| Posted: Tue Dec 08, 2009 4:54 pm Post subject: |
|
|
Dear Oz what would you recommend for serial only connectivity via GSM network
Kindest Regards
m21
|
|
| Back to top |
|
OzCom
Joined: 22 Oct 2003
Posts: 1121
Location: US
|
| Posted: Tue Dec 08, 2009 4:56 pm Post subject: |
|
|
Please send your contact info off list_________________ Aaron D. Osgood
Streamline Communications, LLC
* Authorized Notepage, Inc. Development Partner and Re-seller
TEL: 207-518-8455
AOsgood@streamline-solutions.net
Creators of AutoPage Spillman CAD interface for PageGate |
|
| Back to top |
|
|
