Search found 7 matches

I went into my Windows control panel. Opened the 'System' icon,. choose the 'Device Manager' tab, opened the category: 'Sound Video and Game Controllers' and NO device named 'Wav device for voice modem' existed.

I set the carrier's baud rate back to 1200 and the init string back to auto, and tried again. Still no luck.

The init string the program is choosing for your modem is AT&FQ0V1X4&D2N0+MS=V22,0 .

ok, I tried your ideas but to no avail. It still is showing a "will not connect to carrier" in the log, after i tried each idea and tried to connect. I noticed that the nextel tap 800 number changed, and i changed it in the carrier edit , but even after i did that, it still did not work.

Ok, my version of Windows I am running is ,
Windows 98 4.10.1998., and the make and model of my modem is Rockwell HCF 56K Data Fax Modem, max speed 57600, port COM2, data bits 8, parity none, stop bits 1, driver RSS 9/9/1988, file version 2.1.2.134

Please solve this for me, it is so frustrating not to be able to use your software properly.

Ok, here is what is have done so far per you last reply to me. I have gone into the NotePager 32 help file, then choose 'Contents', and then 'Troubleshooting' topic, and 'Connecting to Carriers using TAP'. I read each topic under that.

I brought up my HyperTerminal program which is installed, but was unable to get any "OK" when i typed AT and then hit return. So, I verified that the modem was working properly by going into control panel, modem, selecting the modem and veryfying that it was working, which it is.

I went back to hyperterminal, closed my ISP connection, put into hyperterminal the nextell 800 number and hit dial, and modem was dialing it, but it would not connect. Next, I went back to the Netpager, without a connection to my ISP on, and tried to dial Nextel's 800 number with a pager message. The modem dialed some number, but never connected. I went into the logfile and here is what it said: start connection to carrier: carrier 1( that is the nextel 800 number i set up ). Connect using TAP protocol. Setting communication parameters. Attempting to reset modem. Modem Reset. Attempting to send carrier init string. Carrier init string sent. Dialing carrier. Waiting for connection. Unable to connect to carrier. Attempting to hang up modem. Modem hung up.

Ok, now what, lol. It sounds like my modem, serial port, and software are all working. I have no problems in any other cases with my modem. Could it be something wrong with the nextel 800 number connection???

Do you have an 800 number so i can call you, and discuss how to remedy my issue regarding my pc's inability to send messages. I checked my port settings, and the notepager and my modem are both set to com 2. I hit control/alt/delete to see if NPP.EXE and NPPDIAL.EXE are running, and i found: NotePager 32 and NPRDIAL, but no NPP.EXE or NPPDIAl.EXE. . Also, I have windows 98, so i do not know how i am supposed to verify if anything is using the modem in stealth.

If you don't have an 800 number for me to call so this does not cost me an arm and a leg, can you contact me, if we set up a coordinated time???

Thank you, hopefully this will be solved soon.

Also take a look at the dialer's log 'View' -> 'Dialer Log' and post what it says.

Here is the data from the other day when i tried to run NotePager 32:

11/4/03 4:44:18 PM Dialer Started
11/4/03 4:44:27 PM Warning. Unable to access modem:
Procedure: SendTAP. Retrying
11/4/03 4:44:31 PM Warning. Unable to access modem:
Procedure: SendTAP. Retrying
11/4/03 4:44:38 PM Program Halted. modem error: 8005 Port already
open in Procedure: Send TAP

This data keeps repeating each time NotePager 32 tries to connect to nextel paging per my attached message to you. Thank you very much for your help in this matter.

When i try and connect to nextel paging, i have inserted the nextel terminal setting number which i found an 800 # for ( even though they have a MA number also , and I live in MA ). When i went to send a pager message for the first time, the Note Pager 32 dialogue box said " connecting to carrier 1", and then it goes into a loop saying "engine not running", what do i do to send a pager message using that 800 number, or am i required to use a long distance number instead. I put in 800-937-8941.

I am new to this. I have a pc and internal modem, and i connect to an isp via my phone line. If i send a text message to a beeper that has a telephone number outside my local calling area, am I charged anything for sending that message via using your software , or does it bypass my telephone company and tranfer directly through the internet to the pager's carrier? Does the pager's carrier charge me back for them sending this message to the pager? Finally, does my telephone number, which is a private number, show up on anything??? and does my telephone number show up on the pager i am trying to reach so that the recipient knows it is me, or is it just my sender's name??

Author	Message
Topic: CONNECTING TO CARRIER, MESSAGE OF ENGINE NOT RUNNING
mel Replies: 12 Views: 31905	Forum: General Questions and Announcements Posted: Mon Nov 10, 2003 10:08 pm Subject: still trying
mel Replies: 12 Views: 31905	I went into my Windows control panel. Opened the 'System' icon,. choose the 'Device Manager' tab, opened the category: 'Sound Video and Game Controllers' and NO device named 'Wav device for voice modem' existed. I set the carrier's baud rate back to 1200 and the init string back to auto, and tried again. Still no luck. The init string the program is choosing for your modem is AT&FQ0V1X4&D2N0+MS=V22,0 .
Topic: CONNECTING TO CARRIER, MESSAGE OF ENGINE NOT RUNNING
mel Replies: 12 Views: 31905	Forum: General Questions and Announcements Posted: Mon Nov 10, 2003 12:42 pm Subject: i am still trying
mel Replies: 12 Views: 31905	ok, I tried your ideas but to no avail. It still is showing a "will not connect to carrier" in the log, after i tried each idea and tried to connect. I noticed that the nextel tap 800 number changed, and i changed it in the carrier edit , but even after i did that, it still did not work. Ok, my version of Windows I am running is , Windows 98 4.10.1998., and the make and model of my modem is Rockwell HCF 56K Data Fax Modem, max speed 57600, port COM2, data bits 8, parity none, stop bits 1, driver RSS 9/9/1988, file version 2.1.2.134 Please solve this for me, it is so frustrating not to be able to use your software properly.
Topic: CONNECTING TO CARRIER, MESSAGE OF ENGINE NOT RUNNING
mel Replies: 12 Views: 31905	Forum: General Questions and Announcements Posted: Sat Nov 08, 2003 12:43 pm Subject: CONTINUING TO TRY TO SOLVE THE PROBLEM
mel Replies: 12 Views: 31905	Ok, here is what is have done so far per you last reply to me. I have gone into the NotePager 32 help file, then choose 'Contents', and then 'Troubleshooting' topic, and 'Connecting to Carriers using TAP'. I read each topic under that. I brought up my HyperTerminal program which is installed, but was unable to get any "OK" when i typed AT and then hit return. So, I verified that the modem was working properly by going into control panel, modem, selecting the modem and veryfying that it was working, which it is. I went back to hyperterminal, closed my ISP connection, put into hyperterminal the nextell 800 number and hit dial, and modem was dialing it, but it would not connect. Next, I went back to the Netpager, without a connection to my ISP on, and tried to dial Nextel's 800 number with a pager message. The modem dialed some number, but never connected. I went into the logfile and here is what it said: start connection to carrier: carrier 1( that is the nextel 800 number i set up ). Connect using TAP protocol. Setting communication parameters. Attempting to reset modem. Modem Reset. Attempting to send carrier init string. Carrier init string sent. Dialing carrier. Waiting for connection. Unable to connect to carrier. Attempting to hang up modem. Modem hung up. Ok, now what, lol. It sounds like my modem, serial port, and software are all working. I have no problems in any other cases with my modem. Could it be something wrong with the nextel 800 number connection???
Topic: CONNECTING TO CARRIER, MESSAGE OF ENGINE NOT RUNNING
mel Replies: 12 Views: 31905	Forum: General Questions and Announcements Posted: Thu Nov 06, 2003 12:57 pm Subject: CONTINUING ISSUE REGARDING INABILITY TO CONNECT
mel Replies: 12 Views: 31905	Do you have an 800 number so i can call you, and discuss how to remedy my issue regarding my pc's inability to send messages. I checked my port settings, and the notepager and my modem are both set to com 2. I hit control/alt/delete to see if NPP.EXE and NPPDIAL.EXE are running, and i found: NotePager 32 and NPRDIAL, but no NPP.EXE or NPPDIAl.EXE. . Also, I have windows 98, so i do not know how i am supposed to verify if anything is using the modem in stealth. If you don't have an 800 number for me to call so this does not cost me an arm and a leg, can you contact me, if we set up a coordinated time??? Thank you, hopefully this will be solved soon.
Topic: CONNECTING TO CARRIER, MESSAGE OF ENGINE NOT RUNNING
mel Replies: 12 Views: 31905	Forum: General Questions and Announcements Posted: Wed Nov 05, 2003 6:36 pm Subject: TECH SUPPORT REQUEST FOR ADDITIONAL INFO ON MY QUESTION
mel Replies: 12 Views: 31905	Also take a look at the dialer's log 'View' -> 'Dialer Log' and post what it says. Here is the data from the other day when i tried to run NotePager 32: 11/4/03 4:44:18 PM Dialer Started 11/4/03 4:44:27 PM Warning. Unable to access modem: Procedure: SendTAP. Retrying 11/4/03 4:44:31 PM Warning. Unable to access modem: Procedure: SendTAP. Retrying 11/4/03 4:44:38 PM Program Halted. modem error: 8005 Port already open in Procedure: Send TAP This data keeps repeating each time NotePager 32 tries to connect to nextel paging per my attached message to you. Thank you very much for your help in this matter.
Topic: CONNECTING TO CARRIER, MESSAGE OF ENGINE NOT RUNNING
mel Replies: 12 Views: 31905	Forum: General Questions and Announcements Posted: Tue Nov 04, 2003 8:44 am Subject: CONNECTING TO CARRIER, MESSAGE OF ENGINE NOT RUNNING
mel Replies: 12 Views: 31905	When i try and connect to nextel paging, i have inserted the nextel terminal setting number which i found an 800 # for ( even though they have a MA number also , and I live in MA ). When i went to send a pager message for the first time, the Note Pager 32 dialogue box said " connecting to carrier 1", and then it goes into a loop saying "engine not running", what do i do to send a pager message using that 800 number, or am i required to use a long distance number instead. I put in 800-937-8941.
Topic: Costs and sender's telephone number identification
mel Replies: 1 Views: 10248	Forum: General Questions and Announcements Posted: Mon Nov 03, 2003 5:32 pm Subject: Costs and sender's telephone number identification
mel Replies: 1 Views: 10248	I am new to this. I have a pc and internal modem, and i connect to an isp via my phone line. If i send a text message to a beeper that has a telephone number outside my local calling area, am I charged anything for sending that message via using your software , or does it bypass my telephone company and tranfer directly through the internet to the pager's carrier? Does the pager's carrier charge me back for them sending this message to the pager? Finally, does my telephone number, which is a private number, show up on anything??? and does my telephone number show up on the pager i am trying to reach so that the recipient knows it is me, or is it just my sender's name??