Search found 8 matches

Thanks for all your help. I didn't even notice the difference in the #'s. WORD UP!

Here it is.

04/15/2005 10:45:16 AM Dialer Started
04/15/2005 10:45:35 AM ========================================
04/15/2005 10:45:35 AM Start connection to carrier: Arch
04/15/2005 10:45:35 AM Connect using TAP protocol
04/15/2005 10:45:35 AM Setting communication parameters
04/15/2005 10:45:36 AM Sent:AT<CR><LF>
04/15/2005 10:45:36 AM Attempting to reset modem
04/15/2005 10:45:38 AM Sent:AT<CR>
04/15/2005 10:45:39 AM Received:<CR><LF>OK<CR><LF>
04/15/2005 10:45:39 AM Modem reset
04/15/2005 10:45:39 AM Attempting to send carrier init string
04/15/2005 10:45:39 AM Sent:AT&F<CR>
04/15/2005 10:45:40 AM Received:<CR><LF>OK<CR><LF>
04/15/2005 10:45:40 AM Carrier init string sent
04/15/2005 10:45:40 AM Dialing carrier
04/15/2005 10:45:41 AM Sent:ATDT1-800-2506325<CR>
04/15/2005 10:45:49 AM Waiting for connection
04/15/2005 10:46:12 AM Received:<CR><LF>CONNECT 50666 V42bis<CR><LF>
04/15/2005 10:46:12 AM Connected to carrier
04/15/2005 10:46:12 AM Waiting for protocol initialization
04/15/2005 10:46:15 AM Received:<CR><LF> ID=
04/15/2005 10:46:15 AM TAP protocol detected
04/15/2005 10:46:15 AM Sent:<ESC>PG1<CR>
04/15/2005 10:46:16 AM Received:<CR><ACK><CR><CR><ESC>[p<CR>
04/15/2005 10:46:16 AM Automatic TAP mode accepted
04/15/2005 10:46:16 AM ----------------------------------------
04/15/2005 10:46:16 AM Working on message to: hallbauer from:
04/15/2005 10:46:16 AM Formatting message
04/15/2005 10:46:16 AM Message contained in single block
04/15/2005 10:46:16 AM Sending block
04/15/2005 10:46:16 AM Sent:<STX>xxxxxxxxx<CR>test<CR><ETX>3?=<CR>
04/15/2005 10:46:16 AM Received:<CR><ACK><CR>
04/15/2005 10:46:16 AM Block sent successfully
04/15/2005 10:46:16 AM SUCCESSFUL To:hallbauer Msg:test
04 ...

Here you go. Looks like alittle more info is included here.

4/15/2005 10:01:28 AM Dialer Started
4/15/2005 10:01:35 AM ========================================
4/15/2005 10:01:35 AM Start connection to carrier: Arch
4/15/2005 10:01:35 AM Connect using TAP protocol
4/15/2005 10:01:35 AM Setting communication parameters
4/15/2005 10:01:36 AM Sent:AT<CR>
4/15/2005 10:01:36 AM Attempting to reset modem
4/15/2005 10:01:38 AM Sent:AT<CR>
4/15/2005 10:01:39 AM Received:<CR><LF>OK<CR><LF>
4/15/2005 10:01:39 AM Modem reset
4/15/2005 10:01:39 AM Attempting to send carrier init string
4/15/2005 10:01:40 AM Sent:AT&F<CR>
4/15/2005 10:01:40 AM Received:<CR><LF>OK<CR><LF>
4/15/2005 10:01:41 AM Carrier init string sent
4/15/2005 10:01:41 AM Dialing carrier
4/15/2005 10:01:41 AM Sent:ATDT1-800-xxx-xxxx<CR>
4/15/2005 10:01:49 AM Waiting for connection
4/15/2005 10:01:59 AM Received:<CR><LF>CONNECT 2400 NoEC<CR><LF>
4/15/2005 10:01:59 AM Connected to carrier
4/15/2005 10:01:59 AM Waiting for protocol initialization
4/15/2005 10:02:01 AM Sent:<CR>
4/15/2005 10:02:02 AM Received:ID=<LF><CR>
4/15/2005 10:02:02 AM TAP protocol detected
4/15/2005 10:02:02 AM Sent:<ESC>PG1<CR>
4/15/2005 10:02:04 AM Received:<ACK><CR><ESC>[p<CR>
4/15/2005 10:02:04 AM Automatic TAP mode accepted
4/15/2005 10:02:04 AM ----------------------------------------
4/15/2005 10:02:04 AM Working on message to: mckernan from:
4/15/2005 10:02:04 AM Formatting message
4/15/2005 10:02:04 AM Message contained in single block
4/15/2005 10:02:04 AM Sending block
4/15/2005 10:02:04 AM Sent:<STX>xxxxxxxxxx<CR>test<CR><ETX>400<CR>
4/15/2005 10:02:05 AM Received:<LF><CR>Record not found for ID: 000000xxxxxxxxxx <CR><RS><CR>
4/15/2005 10:02:05 AM ...

i followed the steps provided. Created a text document within the folder specified, and it didn't tell me that the file could be unusable.

i have another user setup exactly the same, with same info in carrier info, and same infor in recipient. Only difference is the version. the one that works is using version 2.1 and the user that's not is using version 2.0.

???

hidden files are shown, and this is the npp.txt file within specified folder. Is there another way to turn on debugging? I'm still at a loss here.

4/14/2005 12:45:05 PM Start connection to carrier: Arch
4/14/2005 12:45:05 PM Connect using TAP protocol
4/14/2005 12:45:05 PM Setting communication parameters
4/14/2005 12:45:06 PM Attempting to reset modem
4/14/2005 12:45:09 PM Modem reset
4/14/2005 12:45:09 PM Attempting to send carrier init string
4/14/2005 12:45:11 PM Carrier init string sent
4/14/2005 12:45:11 PM Dialing carrier
4/14/2005 12:45:19 PM Waiting for connection
4/14/2005 12:45:29 PM Connected to carrier
4/14/2005 12:45:29 PM Waiting for protocol initialization
4/14/2005 12:45:32 PM TAP protocol detected
4/14/2005 12:45:34 PM Automatic TAP mode accepted
4/14/2005 12:45:34 PM ----------------------------------------
4/14/2005 12:45:34 PM Working on message to: hallbauer from:
4/14/2005 12:45:34 PM Formatting message
4/14/2005 12:45:34 PM Message contained in single block
4/14/2005 12:45:34 PM Sending block
4/14/2005 12:45:35 PM Bad ID or message content. Message aborted
4/14/2005 12:45:35 PM Attempting to hang up modem
4/14/2005 12:45:39 PM Modem hung up
4/14/2005 12:46:07 PM ========================================
4/14/2005 12:46:07 PM Start connection to carrier: Arch
4/14/2005 12:46:07 PM Connect using TAP protocol
4/14/2005 12:46:07 PM Setting communication parameters
4/14/2005 12:46:08 PM Attempting to reset modem
4/14/2005 12:46:11 PM Modem reset
4/14/2005 12:46:11 PM Attempting to send carrier init string
4/14/2005 12:46:13 PM Carrier init string sent
4/14/2005 12:46:13 PM Dialing carrier
4/14/2005 12:46:21 PM Waiting for connection
4/14/2005 12:46:32 PM Connected to carrier
4/14/2005 12:46:32 PM Waiting for protocol initialization
4/14/2005 12:46:34 PM TAP protocol detected
4/14/2005 12:46:37 PM Automatic TAP mode accepted
4/14/2005 12:46:37 PM ------------------------- ...

is this what you were looking for? Anything will help at this point.

4/14/2005 12:44:06 PM Start connection to carrier: Arch
4/14/2005 12:44:06 PM Connect using TAP protocol
4/14/2005 12:44:06 PM Setting communication parameters
4/14/2005 12:44:07 PM Attempting to reset modem
4/14/2005 12:44:10 PM Modem reset
4/14/2005 12:44:10 PM Attempting to send carrier init string
4/14/2005 12:44:12 PM Carrier init string sent
4/14/2005 12:44:12 PM Dialing carrier
4/14/2005 12:44:20 PM Waiting for connection
4/14/2005 12:44:27 PM Connected to carrier
4/14/2005 12:44:27 PM Waiting for protocol initialization
4/14/2005 12:44:30 PM TAP protocol detected
4/14/2005 12:44:32 PM Automatic TAP mode accepted
4/14/2005 12:44:32 PM ----------------------------------------
4/14/2005 12:44:32 PM Working on message to: hallbauer from:
4/14/2005 12:44:32 PM Formatting message
4/14/2005 12:44:32 PM Message contained in single block
4/14/2005 12:44:32 PM Sending block
4/14/2005 12:44:33 PM Bad ID or message content. Message aborted
4/14/2005 12:44:33 PM Attempting to hang up modem
4/14/2005 12:44:36 PM Modem hung up
4/14/2005 12:45:05 PM ========================================
4/14/2005 12:45:05 PM Start connection to carrier: Arch
4/14/2005 12:45:05 PM Connect using TAP protocol
4/14/2005 12:45:05 PM Setting communication parameters
4/14/2005 12:45:06 PM Attempting to reset modem
4/14/2005 12:45:09 PM Modem reset
4/14/2005 12:45:09 PM Attempting to send carrier init string
4/14/2005 12:45:11 PM Carrier init string sent
4/14/2005 12:45:11 PM Dialing carrier
4/14/2005 12:45:19 PM Waiting for connection
4/14/2005 12:45:29 PM Connected to carrier
4/14/2005 12:45:29 PM Waiting for protocol initialization
4/14/2005 12:45:32 PM TAP protocol detected
4/14/2005 12:45:34 PM Automatic TAP mode accepted
4/14/2005 12:45:34 PM ----------------------------------------
4/14/2005 12:45:34 PM Working on message to: hallbauer from ...

i know for a fact that the pager # is correct though with no spaces, dashes or hyphens. It doesn't make any sense. I have another user setup, that's dialing this same # without any proglems. the only difference with that user, is that she has version 2.1 and i'm having problems with version 2.0.

Don't know if the issue is there.

My problem is this. I dial out to arch, and it sounds as if it connects, then it disconnects, and it will retry the process over and over, but there's never a solid connection, and the messages i'm trying to send obviously never send.

I'm using windows xp pro
Baud rate is set at 1200, i've tried 300
The init string is set to auto, it was set at AT&F
my modem is an Agere Win Modem, with the latest updates.
Parity=e
Data Bits=7
Stop Bits=1
ARCH=Carrier 18003743801

I've also included a call log.

Any help would be much appreciated.

Thanks alot.

4/14/2005 10:00:14 AM Start connection to carrier: Arch
4/14/2005 10:00:14 AM Connect using TAP protocol
4/14/2005 10:00:14 AM Setting communication parameters
4/14/2005 10:00:15 AM Attempting to reset modem
4/14/2005 10:00:18 AM Modem reset
4/14/2005 10:00:18 AM Attempting to send carrier init string
4/14/2005 10:00:20 AM Carrier init string sent
4/14/2005 10:00:20 AM Dialing carrier
4/14/2005 10:00:28 AM Waiting for connection
4/14/2005 10:00:38 AM Connected to carrier
4/14/2005 10:00:38 AM Waiting for protocol initialization
4/14/2005 10:00:41 AM TAP protocol detected
4/14/2005 10:00:43 AM Automatic TAP mode accepted
4/14/2005 10:00:43 AM ----------------------------------------
4/14/2005 10:00:43 AM Working on message to: mckernan from:
4/14/2005 10:00:43 AM Formatting message
4/14/2005 10:00:43 AM Message contained in single block
4/14/2005 10:00:43 AM Sending block
4/14/2005 10:00:44 AM Bad ID or message content. Message aborted
4/14/2005 10:00:44 AM Attempting to hang up modem
4/14/2005 10:00:47 AM Modem hung up

Author	Message
Topic: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	Forum: NotePager Pro Support Posted: Fri Apr 15, 2005 11:38 am Subject: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	Thanks for all your help. I didn't even notice the difference in the #'s. WORD UP!
Topic: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	Forum: NotePager Pro Support Posted: Fri Apr 15, 2005 10:48 am Subject: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	Here it is. 04/15/2005 10:45:16 AM Dialer Started 04/15/2005 10:45:35 AM ======================================== 04/15/2005 10:45:35 AM Start connection to carrier: Arch 04/15/2005 10:45:35 AM Connect using TAP protocol 04/15/2005 10:45:35 AM Setting communication parameters 04/15/2005 10:45:36 AM Sent:AT<CR><LF> 04/15/2005 10:45:36 AM Attempting to reset modem 04/15/2005 10:45:38 AM Sent:AT<CR> 04/15/2005 10:45:39 AM Received:<CR><LF>OK<CR><LF> 04/15/2005 10:45:39 AM Modem reset 04/15/2005 10:45:39 AM Attempting to send carrier init string 04/15/2005 10:45:39 AM Sent:AT&F<CR> 04/15/2005 10:45:40 AM Received:<CR><LF>OK<CR><LF> 04/15/2005 10:45:40 AM Carrier init string sent 04/15/2005 10:45:40 AM Dialing carrier 04/15/2005 10:45:41 AM Sent:ATDT1-800-2506325<CR> 04/15/2005 10:45:49 AM Waiting for connection 04/15/2005 10:46:12 AM Received:<CR><LF>CONNECT 50666 V42bis<CR><LF> 04/15/2005 10:46:12 AM Connected to carrier 04/15/2005 10:46:12 AM Waiting for protocol initialization 04/15/2005 10:46:15 AM Received:<CR><LF> ID= 04/15/2005 10:46:15 AM TAP protocol detected 04/15/2005 10:46:15 AM Sent:<ESC>PG1<CR> 04/15/2005 10:46:16 AM Received:<CR><ACK><CR><CR><ESC>[p<CR> 04/15/2005 10:46:16 AM Automatic TAP mode accepted 04/15/2005 10:46:16 AM ---------------------------------------- 04/15/2005 10:46:16 AM Working on message to: hallbauer from: 04/15/2005 10:46:16 AM Formatting message 04/15/2005 10:46:16 AM Message contained in single block 04/15/2005 10:46:16 AM Sending block 04/15/2005 10:46:16 AM Sent:<STX>xxxxxxxxx<CR>test<CR><ETX>3?=<CR> 04/15/2005 10:46:16 AM Received:<CR><ACK><CR> 04/15/2005 10:46:16 AM Block sent successfully 04/15/2005 10:46:16 AM SUCCESSFUL To:hallbauer Msg:test 04 ...
Topic: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	Forum: NotePager Pro Support Posted: Fri Apr 15, 2005 10:04 am Subject: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	Here you go. Looks like alittle more info is included here. 4/15/2005 10:01:28 AM Dialer Started 4/15/2005 10:01:35 AM ======================================== 4/15/2005 10:01:35 AM Start connection to carrier: Arch 4/15/2005 10:01:35 AM Connect using TAP protocol 4/15/2005 10:01:35 AM Setting communication parameters 4/15/2005 10:01:36 AM Sent:AT<CR> 4/15/2005 10:01:36 AM Attempting to reset modem 4/15/2005 10:01:38 AM Sent:AT<CR> 4/15/2005 10:01:39 AM Received:<CR><LF>OK<CR><LF> 4/15/2005 10:01:39 AM Modem reset 4/15/2005 10:01:39 AM Attempting to send carrier init string 4/15/2005 10:01:40 AM Sent:AT&F<CR> 4/15/2005 10:01:40 AM Received:<CR><LF>OK<CR><LF> 4/15/2005 10:01:41 AM Carrier init string sent 4/15/2005 10:01:41 AM Dialing carrier 4/15/2005 10:01:41 AM Sent:ATDT1-800-xxx-xxxx<CR> 4/15/2005 10:01:49 AM Waiting for connection 4/15/2005 10:01:59 AM Received:<CR><LF>CONNECT 2400 NoEC<CR><LF> 4/15/2005 10:01:59 AM Connected to carrier 4/15/2005 10:01:59 AM Waiting for protocol initialization 4/15/2005 10:02:01 AM Sent:<CR> 4/15/2005 10:02:02 AM Received:ID=<LF><CR> 4/15/2005 10:02:02 AM TAP protocol detected 4/15/2005 10:02:02 AM Sent:<ESC>PG1<CR> 4/15/2005 10:02:04 AM Received:<ACK><CR><ESC>[p<CR> 4/15/2005 10:02:04 AM Automatic TAP mode accepted 4/15/2005 10:02:04 AM ---------------------------------------- 4/15/2005 10:02:04 AM Working on message to: mckernan from: 4/15/2005 10:02:04 AM Formatting message 4/15/2005 10:02:04 AM Message contained in single block 4/15/2005 10:02:04 AM Sending block 4/15/2005 10:02:04 AM Sent:<STX>xxxxxxxxxx<CR>test<CR><ETX>400<CR> 4/15/2005 10:02:05 AM Received:<LF><CR>Record not found for ID: 000000xxxxxxxxxx <CR><RS><CR> 4/15/2005 10:02:05 AM ...
Topic: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	Forum: NotePager Pro Support Posted: Fri Apr 15, 2005 9:27 am Subject: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	i followed the steps provided. Created a text document within the folder specified, and it didn't tell me that the file could be unusable. i have another user setup exactly the same, with same info in carrier info, and same infor in recipient. Only difference is the version. the one that works is using version 2.1 and the user that's not is using version 2.0. ???
Topic: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	Forum: NotePager Pro Support Posted: Fri Apr 15, 2005 9:17 am Subject: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	hidden files are shown, and this is the npp.txt file within specified folder. Is there another way to turn on debugging? I'm still at a loss here. 4/14/2005 12:45:05 PM Start connection to carrier: Arch 4/14/2005 12:45:05 PM Connect using TAP protocol 4/14/2005 12:45:05 PM Setting communication parameters 4/14/2005 12:45:06 PM Attempting to reset modem 4/14/2005 12:45:09 PM Modem reset 4/14/2005 12:45:09 PM Attempting to send carrier init string 4/14/2005 12:45:11 PM Carrier init string sent 4/14/2005 12:45:11 PM Dialing carrier 4/14/2005 12:45:19 PM Waiting for connection 4/14/2005 12:45:29 PM Connected to carrier 4/14/2005 12:45:29 PM Waiting for protocol initialization 4/14/2005 12:45:32 PM TAP protocol detected 4/14/2005 12:45:34 PM Automatic TAP mode accepted 4/14/2005 12:45:34 PM ---------------------------------------- 4/14/2005 12:45:34 PM Working on message to: hallbauer from: 4/14/2005 12:45:34 PM Formatting message 4/14/2005 12:45:34 PM Message contained in single block 4/14/2005 12:45:34 PM Sending block 4/14/2005 12:45:35 PM Bad ID or message content. Message aborted 4/14/2005 12:45:35 PM Attempting to hang up modem 4/14/2005 12:45:39 PM Modem hung up 4/14/2005 12:46:07 PM ======================================== 4/14/2005 12:46:07 PM Start connection to carrier: Arch 4/14/2005 12:46:07 PM Connect using TAP protocol 4/14/2005 12:46:07 PM Setting communication parameters 4/14/2005 12:46:08 PM Attempting to reset modem 4/14/2005 12:46:11 PM Modem reset 4/14/2005 12:46:11 PM Attempting to send carrier init string 4/14/2005 12:46:13 PM Carrier init string sent 4/14/2005 12:46:13 PM Dialing carrier 4/14/2005 12:46:21 PM Waiting for connection 4/14/2005 12:46:32 PM Connected to carrier 4/14/2005 12:46:32 PM Waiting for protocol initialization 4/14/2005 12:46:34 PM TAP protocol detected 4/14/2005 12:46:37 PM Automatic TAP mode accepted 4/14/2005 12:46:37 PM ------------------------- ...
Topic: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	Forum: NotePager Pro Support Posted: Thu Apr 14, 2005 12:52 pm Subject: call log
justinberry Replies: 13 Views: 35066	is this what you were looking for? Anything will help at this point. 4/14/2005 12:44:06 PM Start connection to carrier: Arch 4/14/2005 12:44:06 PM Connect using TAP protocol 4/14/2005 12:44:06 PM Setting communication parameters 4/14/2005 12:44:07 PM Attempting to reset modem 4/14/2005 12:44:10 PM Modem reset 4/14/2005 12:44:10 PM Attempting to send carrier init string 4/14/2005 12:44:12 PM Carrier init string sent 4/14/2005 12:44:12 PM Dialing carrier 4/14/2005 12:44:20 PM Waiting for connection 4/14/2005 12:44:27 PM Connected to carrier 4/14/2005 12:44:27 PM Waiting for protocol initialization 4/14/2005 12:44:30 PM TAP protocol detected 4/14/2005 12:44:32 PM Automatic TAP mode accepted 4/14/2005 12:44:32 PM ---------------------------------------- 4/14/2005 12:44:32 PM Working on message to: hallbauer from: 4/14/2005 12:44:32 PM Formatting message 4/14/2005 12:44:32 PM Message contained in single block 4/14/2005 12:44:32 PM Sending block 4/14/2005 12:44:33 PM Bad ID or message content. Message aborted 4/14/2005 12:44:33 PM Attempting to hang up modem 4/14/2005 12:44:36 PM Modem hung up 4/14/2005 12:45:05 PM ======================================== 4/14/2005 12:45:05 PM Start connection to carrier: Arch 4/14/2005 12:45:05 PM Connect using TAP protocol 4/14/2005 12:45:05 PM Setting communication parameters 4/14/2005 12:45:06 PM Attempting to reset modem 4/14/2005 12:45:09 PM Modem reset 4/14/2005 12:45:09 PM Attempting to send carrier init string 4/14/2005 12:45:11 PM Carrier init string sent 4/14/2005 12:45:11 PM Dialing carrier 4/14/2005 12:45:19 PM Waiting for connection 4/14/2005 12:45:29 PM Connected to carrier 4/14/2005 12:45:29 PM Waiting for protocol initialization 4/14/2005 12:45:32 PM TAP protocol detected 4/14/2005 12:45:34 PM Automatic TAP mode accepted 4/14/2005 12:45:34 PM ---------------------------------------- 4/14/2005 12:45:34 PM Working on message to: hallbauer from ...
Topic: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	Forum: NotePager Pro Support Posted: Thu Apr 14, 2005 10:51 am Subject: bad id/pin
justinberry Replies: 13 Views: 35066	i know for a fact that the pager # is correct though with no spaces, dashes or hyphens. It doesn't make any sense. I have another user setup, that's dialing this same # without any proglems. the only difference with that user, is that she has version 2.1 and i'm having problems with version 2.0. Don't know if the issue is there.
Topic: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	Forum: NotePager Pro Support Posted: Thu Apr 14, 2005 10:33 am Subject: Note Pager connect then disconnect without sending data.
justinberry Replies: 13 Views: 35066	My problem is this. I dial out to arch, and it sounds as if it connects, then it disconnects, and it will retry the process over and over, but there's never a solid connection, and the messages i'm trying to send obviously never send. I'm using windows xp pro Baud rate is set at 1200, i've tried 300 The init string is set to auto, it was set at AT&F my modem is an Agere Win Modem, with the latest updates. Parity=e Data Bits=7 Stop Bits=1 ARCH=Carrier 18003743801 I've also included a call log. Any help would be much appreciated. Thanks alot. 4/14/2005 10:00:14 AM Start connection to carrier: Arch 4/14/2005 10:00:14 AM Connect using TAP protocol 4/14/2005 10:00:14 AM Setting communication parameters 4/14/2005 10:00:15 AM Attempting to reset modem 4/14/2005 10:00:18 AM Modem reset 4/14/2005 10:00:18 AM Attempting to send carrier init string 4/14/2005 10:00:20 AM Carrier init string sent 4/14/2005 10:00:20 AM Dialing carrier 4/14/2005 10:00:28 AM Waiting for connection 4/14/2005 10:00:38 AM Connected to carrier 4/14/2005 10:00:38 AM Waiting for protocol initialization 4/14/2005 10:00:41 AM TAP protocol detected 4/14/2005 10:00:43 AM Automatic TAP mode accepted 4/14/2005 10:00:43 AM ---------------------------------------- 4/14/2005 10:00:43 AM Working on message to: mckernan from: 4/14/2005 10:00:43 AM Formatting message 4/14/2005 10:00:43 AM Message contained in single block 4/14/2005 10:00:43 AM Sending block 4/14/2005 10:00:44 AM Bad ID or message content. Message aborted 4/14/2005 10:00:44 AM Attempting to hang up modem 4/14/2005 10:00:47 AM Modem hung up