Search found 6 matches

Sure. It is:

Model: MTCBA-C-N3-NAM

I had contacted Verizon and they had stated the line should be working normally. I went through Putty and here is the results:

> AT+CSQ
> +CSQ: 15, 99
>
> OK
> AT+CREG?
> +CREG:0,1

From these results, does this mean it has initiated connection with Verizon successfully? If so, then a hardware problem could be a possibility.

Okay under "Connector1" I've set Init String to AT+CSQ and under Carrier left the init string blank. It seems to show the same message saying SUCCESSFUL etc but person still has not received text. I noted everyone saying that the modem must be set to use English ASCII so I looked up the commands for this particular modem:

ftp://ftp.multitech.com/wireless/GPS/S000294G-ATcommand.pdf

and found the command to set it to english:
"AT+WSCL=1,2"

I tried that under Connector1 Init String but that doesn't seem to work either.

I apologize not being familiar with this.

No the person never received the message.

Here is what my setting looks like for CDMA modem and Connector 1:

http://i.imgur.com/oQJvV.png

http://i.imgur.com/Mqybv.png

Thank you for the reply.

Yes after I had typed in the command here is a snippet of the log related to it:
9/27/2012 1:56:55 PM ========================================
9/27/2012 1:56:55 PM Start connection to carrier: CDMA_Modem
9/27/2012 1:56:55 PM Connect using GSM protocol
9/27/2012 1:56:55 PM Setting communication parameters (115200,n,8,1)
9/27/2012 1:56:56 PM Attempting to reset modem
9/27/2012 1:57:08 PM Sent:AT<CR>
9/27/2012 1:57:08 PM Received:<CR><LF>OK<CR><LF>
9/27/2012 1:57:09 PM Modem reset
9/27/2012 1:57:09 PM Attempting to send dialer init string
9/27/2012 1:57:09 PM Sent:AT&FQ0V1X4&D2+MS=V22,0<CR>
9/27/2012 1:57:11 PM Received:<CR><LF>OK<CR><LF>
9/27/2012 1:57:11 PM Dialer init string sent
9/27/2012 1:57:11 PM Attempting to send carrier init string
9/27/2012 1:57:12 PM Sent:AT&FQ0V1X4&D2+MS=V22,0<CR>
9/27/2012 1:57:14 PM Received:<CR><LF>OK<CR><LF>
9/27/2012 1:57:14 PM Carrier init string sent
9/27/2012 1:57:14 PM Sent:AT+CMGF=1<CR>
9/27/2012 1:57:18 PM Received:<CR><LF>ERROR<CR><LF>
9/27/2012 1:57:18 PM Unable to enter text delivery mode, continuing anyway
9/27/2012 1:57:18 PM ----------------------------------------
9/27/2012 1:57:18 PM Working on message to: michael from: WWB
9/27/2012 1:57:18 PM Formatting message
9/27/2012 1:57:18 PM Message contained in a single packet
9/27/2012 1:57:18 PM Sending packet
9/27/2012 1:57:18 PM Sent:AT+CMGS="XXXXXXXXXX"<CR>
9/27/2012 1:57:21 PM Received:<LF>
9/27/2012 1:57:21 PM Sent:WWB:testing<CR><LF><SUB>
9/27/2012 1:57:22 PM Received:<SUB><CR><LF>+CMGS:18<CR><LF>OK<CR><LF>
9/27/2012 1:57:22 PM Packet sent successfully
9/27/2012 1:57:22 PM SUCCESSFUL Stn:1 To:michael Frm:WWB File:TMP15598.205 Msg:testing<13><10>
9/27/2012 1:57:22 PM ...

I'm having some trouble trying to figure out how to get PageGate SMS working again. We've had PageGate for a while now and the person who set it up is no longer working here anymore. Here is the setup we have right now:

Windows XP
PageGate 5
Multi-Tech CDMA Modem (http://reviews.cnet.com/search-results/multi-tech-multimodem-cdma/4505-5_7-31631419.html) connected by serial to PC.

I've used this command:
sendpage.exe michael WWB "testing"

No luck.

Not sure where to begin in diagnosing this problem. Much help would be appreciated! Thank you!

Author	Message
Topic: PageGate not sending SMS
darklunar Replies: 13 Views: 29641	Forum: PageGate Support Posted: Wed Oct 03, 2012 2:49 pm Subject: PageGate not sending SMS
darklunar Replies: 13 Views: 29641	Sure. It is: Model: MTCBA-C-N3-NAM
Topic: PageGate not sending SMS
darklunar Replies: 13 Views: 29641	Forum: PageGate Support Posted: Wed Oct 03, 2012 2:23 pm Subject: PageGate not sending SMS
darklunar Replies: 13 Views: 29641	I had contacted Verizon and they had stated the line should be working normally. I went through Putty and here is the results: > AT+CSQ > +CSQ: 15, 99 > > OK > AT+CREG? > +CREG:0,1 From these results, does this mean it has initiated connection with Verizon successfully? If so, then a hardware problem could be a possibility.
Topic: PageGate not sending SMS
darklunar Replies: 13 Views: 29641	Forum: PageGate Support Posted: Mon Oct 01, 2012 10:50 am Subject: PageGate not sending SMS
darklunar Replies: 13 Views: 29641	Okay under "Connector1" I've set Init String to AT+CSQ and under Carrier left the init string blank. It seems to show the same message saying SUCCESSFUL etc but person still has not received text. I noted everyone saying that the modem must be set to use English ASCII so I looked up the commands for this particular modem: ftp://ftp.multitech.com/wireless/GPS/S000294G-ATcommand.pdf and found the command to set it to english: "AT+WSCL=1,2" I tried that under Connector1 Init String but that doesn't seem to work either. I apologize not being familiar with this.
Topic: PageGate not sending SMS
darklunar Replies: 13 Views: 29641	Forum: PageGate Support Posted: Mon Oct 01, 2012 10:25 am Subject: PageGate not sending SMS
darklunar Replies: 13 Views: 29641	No the person never received the message. Here is what my setting looks like for CDMA modem and Connector 1: http://i.imgur.com/oQJvV.png http://i.imgur.com/Mqybv.png
Topic: PageGate not sending SMS
darklunar Replies: 13 Views: 29641	Forum: PageGate Support Posted: Thu Sep 27, 2012 1:19 pm Subject: PageGate not sending SMS
darklunar Replies: 13 Views: 29641	Thank you for the reply. Yes after I had typed in the command here is a snippet of the log related to it: 9/27/2012 1:56:55 PM ======================================== 9/27/2012 1:56:55 PM Start connection to carrier: CDMA_Modem 9/27/2012 1:56:55 PM Connect using GSM protocol 9/27/2012 1:56:55 PM Setting communication parameters (115200,n,8,1) 9/27/2012 1:56:56 PM Attempting to reset modem 9/27/2012 1:57:08 PM Sent:AT<CR> 9/27/2012 1:57:08 PM Received:<CR><LF>OK<CR><LF> 9/27/2012 1:57:09 PM Modem reset 9/27/2012 1:57:09 PM Attempting to send dialer init string 9/27/2012 1:57:09 PM Sent:AT&FQ0V1X4&D2+MS=V22,0<CR> 9/27/2012 1:57:11 PM Received:<CR><LF>OK<CR><LF> 9/27/2012 1:57:11 PM Dialer init string sent 9/27/2012 1:57:11 PM Attempting to send carrier init string 9/27/2012 1:57:12 PM Sent:AT&FQ0V1X4&D2+MS=V22,0<CR> 9/27/2012 1:57:14 PM Received:<CR><LF>OK<CR><LF> 9/27/2012 1:57:14 PM Carrier init string sent 9/27/2012 1:57:14 PM Sent:AT+CMGF=1<CR> 9/27/2012 1:57:18 PM Received:<CR><LF>ERROR<CR><LF> 9/27/2012 1:57:18 PM Unable to enter text delivery mode, continuing anyway 9/27/2012 1:57:18 PM ---------------------------------------- 9/27/2012 1:57:18 PM Working on message to: michael from: WWB 9/27/2012 1:57:18 PM Formatting message 9/27/2012 1:57:18 PM Message contained in a single packet 9/27/2012 1:57:18 PM Sending packet 9/27/2012 1:57:18 PM Sent:AT+CMGS="XXXXXXXXXX"<CR> 9/27/2012 1:57:21 PM Received:<LF> 9/27/2012 1:57:21 PM Sent:WWB:testing<CR><LF><SUB> 9/27/2012 1:57:22 PM Received:<SUB><CR><LF>+CMGS:18<CR><LF>OK<CR><LF> 9/27/2012 1:57:22 PM Packet sent successfully 9/27/2012 1:57:22 PM SUCCESSFUL Stn:1 To:michael Frm:WWB File:TMP15598.205 Msg:testing<13><10> 9/27/2012 1:57:22 PM ...
Topic: PageGate not sending SMS
darklunar Replies: 13 Views: 29641	Forum: PageGate Support Posted: Wed Sep 26, 2012 3:06 pm Subject: PageGate not sending SMS
darklunar Replies: 13 Views: 29641	I'm having some trouble trying to figure out how to get PageGate SMS working again. We've had PageGate for a while now and the person who set it up is no longer working here anymore. Here is the setup we have right now: Windows XP PageGate 5 Multi-Tech CDMA Modem (http://reviews.cnet.com/search-results/multi-tech-multimodem-cdma/4505-5_7-31631419.html) connected by serial to PC. I've used this command: sendpage.exe michael WWB "testing" No luck. Not sure where to begin in diagnosing this problem. Much help would be appreciated! Thank you!