Search found 8 matches

I have found solution for checksum error, I just removed the clear to send and request to send connector which was connected to multiport connector and the problem fixed now

still taking long time more than a minute please your help is much appreciated

6/30/2011 5:14:27 PM ========================================
6/30/2011 5:14:27 PM Start connection to carrier: ZetronDirect
6/30/2011 5:14:27 PM Connect using TAP protocol
6/30/2011 5:14:27 PM Setting communication parameters (300,e,7,1)
6/30/2011 5:14:27 PM Connected to carrier
6/30/2011 5:14:27 PM Waiting for protocol initialization
6/30/2011 5:14:27 PM Sent:<CR>
6/30/2011 5:14:27 PM Received:ID=
6/30/2011 5:14:27 PM TAP protocol detected
6/30/2011 5:14:28 PM Sent:<ESC>PG1<CR>
6/30/2011 5:14:28 PM Received:<ACK><CR><ESC>[p<CR>
6/30/2011 5:14:29 PM Received:<ACK><CR><ESC>[p<CR>
6/30/2011 5:14:29 PM Automatic TAP mode accepted
6/30/2011 5:14:29 PM ----------------------------------------
6/30/2011 5:14:29 PM Working on message to: julius from: Ahmad
6/30/2011 5:14:29 PM Formatting message
6/30/2011 5:14:29 PM Message contained in single packet
6/30/2011 5:14:29 PM Message contained in single block
6/30/2011 5:14:29 PM Sending block
6/30/2011 5:14:29 PM Sent:<STX>1252<CR>Ahmad:7788<CR><ETX>3=<<CR>
6/30/2011 5:14:30 PM Received:<NAK><CR>
6/30/2011 5:14:30 PM Checksum error. Retrying block
6/30/2011 5:14:30 PM Sent:<EOT><CR>
6/30/2011 5:15:01 PM ========================================
6/30/2011 5:15:01 PM Start connection to carrier: ZetronDirect
6/30/2011 5:15:01 PM Connect using TAP protocol
6/30/2011 5:15:01 PM Setting communication parameters (300,e,7,1)
6/30/2011 5:15:01 PM Connected to carrier
6/30/2011 5:15:01 PM Waiting for protocol initialization
6/30/2011 5:15:01 PM Sent:<CR>
6/30/2011 5:15:01 PM Received:ID=
6/30/2011 5:15:01 PM TAP protocol detected
6/30/2011 5:15:02 PM Sent:<ESC>PG1<CR>
6/30/2011 5:15:12 PM Sent:<ESC>PG1<CR>
6/30/2011 5:15:22 PM Received ...

aslo some marked as bad and other sent and the one is sent took long time
while when using Auto tap from zetron works fine with every single message and maximum sending in 7 seconds

here is the log hope I found solution since we already bought page gate software and we are going to use it

6/30/2011 4:56:05 PM Working on message to: julius from: Ahmad
6/30/2011 4:56:05 PM Formatting message
6/30/2011 4:56:05 PM Message contained in single packet
6/30/2011 4:56:05 PM Message contained in single block
6/30/2011 4:56:05 PM Sending block
6/30/2011 4:56:05 PM Sent:<STX>1252<CR>Ahmad:545454<CR><ETX>439<CR>
6/30/2011 4:56:26 PM No response from carrier. Disconnecting
6/30/2011 4:56:26 PM Sent:<EOT><CR>
6/30/2011 4:56:57 PM ========================================
6/30/2011 4:56:57 PM Start connection to carrier: ZetronDirect
6/30/2011 4:56:57 PM Connect using TAP protocol
6/30/2011 4:56:57 PM Setting communication parameters (300,e,7,2)
6/30/2011 4:56:57 PM Connected to carrier
6/30/2011 4:56:57 PM Waiting for protocol initialization
6/30/2011 4:56:57 PM Sent:<CR>
6/30/2011 4:56:57 PM Received:ID=
6/30/2011 4:56:57 PM TAP protocol detected
6/30/2011 4:56:58 PM Sent:<ESC>PG1<CR>
6/30/2011 4:57:08 PM Sent:<ESC>PG1<CR>
6/30/2011 4:57:18 PM Received:ID=
6/30/2011 4:57:19 PM Sent:<ESC>PG1<CR>
6/30/2011 4:57:19 PM Received:<ACK><CR><ESC>[
6/30/2011 4:57:20 PM Received:<ACK><CR><ESC>[p<CR>
6/30/2011 4:57:20 PM Automatic TAP mode accepted
6/30/2011 4:57:20 PM ----------------------------------------
6/30/2011 4:57:20 PM Working on message to: julius from: Ahmad
6/30/2011 4:57:20 PM Formatting message
6/30/2011 4:57:20 PM Message contained in single packet
6/30/2011 4:57:20 PM Message contained in single block
6/30/2011 4:57:20 PM Sending block
6/30/2011 4:57:20 PM Sent:<STX>1252<C ...

I have managed to connect to paging terminal but the page gate take long time to send messages?!

yes its set to direct

I would like to use multiport on zetron the following is configuration any hint what is the parameter for the port?

; Multi-Port Serial card 12:
; [configure for port 0, then repeat as needed for 4 or 8 ports]
; [ note that baud rate & parity MUST be set before linetype for each port]
; Port 1
0C 00 02 0B 00 ; 300 baud ; 00=300B 01=1200B 02=9600B 05=2400B 06=4800B
0C 00 02 0C 00 ; even parity ; see page 12-7 of installation manual
0C 00 02 14 00 ; logon timeout, in seconds (0 disables); page 12-8 of installation manual
0C 00 02 0D 00 ; disable transaction messages 00=disable 01=enabled
0C 00 02 1E 00 ; force manual entry mode 0=no, 1=yes (8a4+)
0C 00 05 09 11 00 00 01 ; serial port, 0 ring, 0 digits, can answer
; Logon Param, Wait <CR>, ID= No termination, logon try=3, Subsequent
; <CR>=Reissue "ID=", Unexpected input = No respone.
0C 00 06 2B 01 00 03 00 00 ; see note above
; Modem Init. for external modem for Serial Applications. ( USR 33.6 & 56K )
;0C 00 14 F8 41 54 26 4D 30 26 4B 30 26 48 31 26 42 31 42 31 58 33 0D ;
; Port 2
0C 01 02 0B 00 ; 300 baud ; 00=300B 01=1200B 02=9600B 05=2400B 06=4800B
0C 01 02 0C 00 ; even parity ; see page 12-7 of installation manual
0C 01 02 14 00 ; logon timeout, in seconds (0 disables); page 12-8 of installation manual
0C 01 02 0D 00 ; disable transaction messages 00=disable 01=enabled
0C 01 02 1E 00 ; force manual entry mode 0=no, 1=yes (8a4+)
0C 01 05 09 11 00 00 01 ; serial port, 0 ring, 0 digits, can answer
; Logon Param, Wait <CR>, ID= No termination, logon try=3, Subsequent
; <CR>=Reissue "ID=", Unexpected input = No respone.
0C 01 06 2B 01 00 03 00 00 ; see note above
; Modem Init. for external modem for Serial Applications. ( USR ...

OzCom I tried that but of no avail. Any other suggestion ?

Thank you very much for your prompt reply, I have tried to connect to the terminal with the same parameter but with other software ( Zlink, ZbaseW) and I was able to connect and send message to user.
but it didn't work with pagegate please advise on this issue
thank you again for your hellp and cooperation.

I have a problem when I try to send message from page gate client to page gate server
I have the following logg for connector 1
my page gate server connected to zetron 2200 through local rs232 connector not multiport
6/27/2011 2:56:44 PM ========================================
6/27/2011 2:56:44 PM Start connection to carrier: ZetronDirect
6/27/2011 2:56:44 PM Connect using TAP protocol
6/27/2011 2:56:44 PM Setting communication parameters (4800,n,8,1)
6/27/2011 2:56:44 PM Connected to carrier
6/27/2011 2:56:44 PM Waiting for protocol initialization
6/27/2011 2:56:44 PM Sent:<CR>
6/27/2011 2:56:47 PM Received:<1><1>y<127>m5
6/27/2011 2:56:47 PM Sent:<CR>
6/27/2011 2:56:51 PM Received:<1><1>y<127>m5 <1><1>y<127>m5
6/27/2011 2:56:51 PM Sent:<CR>
6/27/2011 2:56:56 PM Received:<1><1>y<127>m5 <1><1>y<127>m5 <1><1>y<127>m5
6/27/2011 2:56:56 PM Sent:<CR>
6/27/2011 2:57:02 PM Received:<1><1>y<127>m5 <1><1>y<127>m5 <1><1>y<127>m5
6/27/2011 2:57:37 PM ========================================
6/27/2011 2:57:37 PM Start connection to carrier: ZetronDirect
6/27/2011 2:57:37 PM Connect using TAP protocol
6/27/2011 2:57:37 PM Setting communication parameters (4800,n,8,1)
6/27/2011 2:57:37 PM Connected to carrier
6/27/2011 2:57:37 PM Waiting for protocol initialization
6/27/2011 2:57:37 PM Sent:<CR>
6/27/2011 2:57:40 PM Received:<1><1>y<127>m5
6/27/2011 2:57:40 PM Sent:<CR>
6/27/2011 2:57:45 PM Received:<1><1>y<127>m5 <1><1>y<127>m5
6/27/2011 2:57:45 PM Sent:<CR>
6/27/2011 2:57:50 PM Received:<1><1>y<127>m5 <1><1>y<127>m5 <1><1>y<127>m5
6/27/2011 2:57:50 PM Sent:<CR>
6/27/2011 2:57:56 PM Received:<1>& ...

Author	Message
Topic: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	Forum: PageGate Support Posted: Fri Jul 01, 2011 6:42 pm Subject: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	I have found solution for checksum error, I just removed the clear to send and request to send connector which was connected to multiport connector and the problem fixed now
Topic: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	Forum: PageGate Support Posted: Thu Jun 30, 2011 9:18 am Subject: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	still taking long time more than a minute please your help is much appreciated 6/30/2011 5:14:27 PM ======================================== 6/30/2011 5:14:27 PM Start connection to carrier: ZetronDirect 6/30/2011 5:14:27 PM Connect using TAP protocol 6/30/2011 5:14:27 PM Setting communication parameters (300,e,7,1) 6/30/2011 5:14:27 PM Connected to carrier 6/30/2011 5:14:27 PM Waiting for protocol initialization 6/30/2011 5:14:27 PM Sent:<CR> 6/30/2011 5:14:27 PM Received:ID= 6/30/2011 5:14:27 PM TAP protocol detected 6/30/2011 5:14:28 PM Sent:<ESC>PG1<CR> 6/30/2011 5:14:28 PM Received:<ACK><CR><ESC>[p<CR> 6/30/2011 5:14:29 PM Received:<ACK><CR><ESC>[p<CR> 6/30/2011 5:14:29 PM Automatic TAP mode accepted 6/30/2011 5:14:29 PM ---------------------------------------- 6/30/2011 5:14:29 PM Working on message to: julius from: Ahmad 6/30/2011 5:14:29 PM Formatting message 6/30/2011 5:14:29 PM Message contained in single packet 6/30/2011 5:14:29 PM Message contained in single block 6/30/2011 5:14:29 PM Sending block 6/30/2011 5:14:29 PM Sent:<STX>1252<CR>Ahmad:7788<CR><ETX>3=<<CR> 6/30/2011 5:14:30 PM Received:<NAK><CR> 6/30/2011 5:14:30 PM Checksum error. Retrying block 6/30/2011 5:14:30 PM Sent:<EOT><CR> 6/30/2011 5:15:01 PM ======================================== 6/30/2011 5:15:01 PM Start connection to carrier: ZetronDirect 6/30/2011 5:15:01 PM Connect using TAP protocol 6/30/2011 5:15:01 PM Setting communication parameters (300,e,7,1) 6/30/2011 5:15:01 PM Connected to carrier 6/30/2011 5:15:01 PM Waiting for protocol initialization 6/30/2011 5:15:01 PM Sent:<CR> 6/30/2011 5:15:01 PM Received:ID= 6/30/2011 5:15:01 PM TAP protocol detected 6/30/2011 5:15:02 PM Sent:<ESC>PG1<CR> 6/30/2011 5:15:12 PM Sent:<ESC>PG1<CR> 6/30/2011 5:15:22 PM Received ...
Topic: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	Forum: PageGate Support Posted: Thu Jun 30, 2011 9:05 am Subject: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	aslo some marked as bad and other sent and the one is sent took long time while when using Auto tap from zetron works fine with every single message and maximum sending in 7 seconds here is the log hope I found solution since we already bought page gate software and we are going to use it 6/30/2011 4:56:05 PM Working on message to: julius from: Ahmad 6/30/2011 4:56:05 PM Formatting message 6/30/2011 4:56:05 PM Message contained in single packet 6/30/2011 4:56:05 PM Message contained in single block 6/30/2011 4:56:05 PM Sending block 6/30/2011 4:56:05 PM Sent:<STX>1252<CR>Ahmad:545454<CR><ETX>439<CR> 6/30/2011 4:56:26 PM No response from carrier. Disconnecting 6/30/2011 4:56:26 PM Sent:<EOT><CR> 6/30/2011 4:56:57 PM ======================================== 6/30/2011 4:56:57 PM Start connection to carrier: ZetronDirect 6/30/2011 4:56:57 PM Connect using TAP protocol 6/30/2011 4:56:57 PM Setting communication parameters (300,e,7,2) 6/30/2011 4:56:57 PM Connected to carrier 6/30/2011 4:56:57 PM Waiting for protocol initialization 6/30/2011 4:56:57 PM Sent:<CR> 6/30/2011 4:56:57 PM Received:ID= 6/30/2011 4:56:57 PM TAP protocol detected 6/30/2011 4:56:58 PM Sent:<ESC>PG1<CR> 6/30/2011 4:57:08 PM Sent:<ESC>PG1<CR> 6/30/2011 4:57:18 PM Received:ID= 6/30/2011 4:57:19 PM Sent:<ESC>PG1<CR> 6/30/2011 4:57:19 PM Received:<ACK><CR><ESC>[ 6/30/2011 4:57:20 PM Received:<ACK><CR><ESC>[p<CR> 6/30/2011 4:57:20 PM Automatic TAP mode accepted 6/30/2011 4:57:20 PM ---------------------------------------- 6/30/2011 4:57:20 PM Working on message to: julius from: Ahmad 6/30/2011 4:57:20 PM Formatting message 6/30/2011 4:57:20 PM Message contained in single packet 6/30/2011 4:57:20 PM Message contained in single block 6/30/2011 4:57:20 PM Sending block 6/30/2011 4:57:20 PM Sent:<STX>1252<C ...
Topic: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	Forum: PageGate Support Posted: Thu Jun 30, 2011 8:28 am Subject: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	I have managed to connect to paging terminal but the page gate take long time to send messages?!
Topic: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	Forum: PageGate Support Posted: Tue Jun 28, 2011 10:14 am Subject: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	yes its set to direct I would like to use multiport on zetron the following is configuration any hint what is the parameter for the port? ; Multi-Port Serial card 12: ; [configure for port 0, then repeat as needed for 4 or 8 ports] ; [ note that baud rate & parity MUST be set before linetype for each port] ; Port 1 0C 00 02 0B 00 ; 300 baud ; 00=300B 01=1200B 02=9600B 05=2400B 06=4800B 0C 00 02 0C 00 ; even parity ; see page 12-7 of installation manual 0C 00 02 14 00 ; logon timeout, in seconds (0 disables); page 12-8 of installation manual 0C 00 02 0D 00 ; disable transaction messages 00=disable 01=enabled 0C 00 02 1E 00 ; force manual entry mode 0=no, 1=yes (8a4+) 0C 00 05 09 11 00 00 01 ; serial port, 0 ring, 0 digits, can answer ; Logon Param, Wait <CR>, ID= No termination, logon try=3, Subsequent ; <CR>=Reissue "ID=", Unexpected input = No respone. 0C 00 06 2B 01 00 03 00 00 ; see note above ; Modem Init. for external modem for Serial Applications. ( USR 33.6 & 56K ) ;0C 00 14 F8 41 54 26 4D 30 26 4B 30 26 48 31 26 42 31 42 31 58 33 0D ; ; Port 2 0C 01 02 0B 00 ; 300 baud ; 00=300B 01=1200B 02=9600B 05=2400B 06=4800B 0C 01 02 0C 00 ; even parity ; see page 12-7 of installation manual 0C 01 02 14 00 ; logon timeout, in seconds (0 disables); page 12-8 of installation manual 0C 01 02 0D 00 ; disable transaction messages 00=disable 01=enabled 0C 01 02 1E 00 ; force manual entry mode 0=no, 1=yes (8a4+) 0C 01 05 09 11 00 00 01 ; serial port, 0 ring, 0 digits, can answer ; Logon Param, Wait <CR>, ID= No termination, logon try=3, Subsequent ; <CR>=Reissue "ID=", Unexpected input = No respone. 0C 01 06 2B 01 00 03 00 00 ; see note above ; Modem Init. for external modem for Serial Applications. ( USR ...
Topic: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	Forum: PageGate Support Posted: Mon Jun 27, 2011 5:37 pm Subject: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	OzCom I tried that but of no avail. Any other suggestion ?
Topic: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	Forum: PageGate Support Posted: Mon Jun 27, 2011 10:51 am Subject: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	Thank you very much for your prompt reply, I have tried to connect to the terminal with the same parameter but with other software ( Zlink, ZbaseW) and I was able to connect and send message to user. but it didn't work with pagegate please advise on this issue thank you again for your hellp and cooperation.
Topic: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	Forum: PageGate Support Posted: Mon Jun 27, 2011 10:03 am Subject: PageGate direct connect with zetron 2200
ahmadj Replies: 16 Views: 41184	I have a problem when I try to send message from page gate client to page gate server I have the following logg for connector 1 my page gate server connected to zetron 2200 through local rs232 connector not multiport 6/27/2011 2:56:44 PM ======================================== 6/27/2011 2:56:44 PM Start connection to carrier: ZetronDirect 6/27/2011 2:56:44 PM Connect using TAP protocol 6/27/2011 2:56:44 PM Setting communication parameters (4800,n,8,1) 6/27/2011 2:56:44 PM Connected to carrier 6/27/2011 2:56:44 PM Waiting for protocol initialization 6/27/2011 2:56:44 PM Sent:<CR> 6/27/2011 2:56:47 PM Received:<1><1>y<127>m5 6/27/2011 2:56:47 PM Sent:<CR> 6/27/2011 2:56:51 PM Received:<1><1>y<127>m5 <1><1>y<127>m5 6/27/2011 2:56:51 PM Sent:<CR> 6/27/2011 2:56:56 PM Received:<1><1>y<127>m5 <1><1>y<127>m5 <1><1>y<127>m5 6/27/2011 2:56:56 PM Sent:<CR> 6/27/2011 2:57:02 PM Received:<1><1>y<127>m5 <1><1>y<127>m5 <1><1>y<127>m5 6/27/2011 2:57:37 PM ======================================== 6/27/2011 2:57:37 PM Start connection to carrier: ZetronDirect 6/27/2011 2:57:37 PM Connect using TAP protocol 6/27/2011 2:57:37 PM Setting communication parameters (4800,n,8,1) 6/27/2011 2:57:37 PM Connected to carrier 6/27/2011 2:57:37 PM Waiting for protocol initialization 6/27/2011 2:57:37 PM Sent:<CR> 6/27/2011 2:57:40 PM Received:<1><1>y<127>m5 6/27/2011 2:57:40 PM Sent:<CR> 6/27/2011 2:57:45 PM Received:<1><1>y<127>m5 <1><1>y<127>m5 6/27/2011 2:57:45 PM Sent:<CR> 6/27/2011 2:57:50 PM Received:<1><1>y<127>m5 <1><1>y<127>m5 <1><1>y<127>m5 6/27/2011 2:57:50 PM Sent:<CR> 6/27/2011 2:57:56 PM Received:<1>& ...