Search found 9 matches

Thank you!

I am getting a message via GetMail. I need to prepend a string of characters to the payload before/when it is sent out to the carrier via WCTP. Is this possible?

Thanks,

Taylor

Thanks for your help. I used fastmail (domain fastmail.fm), and it works great. I bought the 4.99/yr account that supports POP3 w/ no SSL.

Now just need help w/ getting WCTP sent to a port other than 80 (my other post) and NotePage will solve a big problem for us.

Taylor

Hi Aaron,

Tried that too. No luck. I am running Wireshark and am monitoring the traffic on the PC PageGate is on. Is is all going to port 80 of the destination. The only time it doesn't is when I pick port 50100, when I get the database error.

Thanks again,

Taylor

Hi Aaron,

I believe so. I went to PageGate Admin, and under Connectors/Connector1, I stopped it and then started it again. Is this correct? I also restarted the PC and then monitored the traffic. It still appears to be going port 80, even though I experimented with assigning the WCTP port to 7777.

Thanks for your help!

Taylor

I continued to experiment with other ports. I tried port 7777, and no longer saw this behavior in the log file. However, I did notice that the traffic from PageGate was sent to port 80. It appears that the selection of 7777 was ignored.

We ran a packet capture on port 80, and saw traffic arrive at our from PageGate server. However, when we tried port 50100 for WCTP, nothing. Log follows. Port 80 is already being used for other purposes.

3/18/2011 4:08:06 PM ========================================
3/18/2011 4:08:06 PM Start connection to carrier: VDS
3/18/2011 4:08:06 PM Send using WCTP protocol
3/18/2011 4:08:06 PM Program Halted. Database error: 3219 Invalid operation. in Procedure: SendWCTP
3/18/2011 4:08:06 PM Module Stopped
3/18/2011 4:08:09 PM Module Started
3/18/2011 4:08:12 PM Time synchronized with scheduler
3/18/2011 4:08:16 PM ========================================
3/18/2011 4:08:16 PM Start connection to carrier: VDS
3/18/2011 4:08:16 PM Send using WCTP protocol
3/18/2011 4:08:16 PM Program Halted. Database error: 3219 Invalid operation. in Procedure: SendWCTP
3/18/2011 4:08:16 PM Module Stopped
3/18/2011 4:08:20 PM Module Started

I am doing some testing, and I am trying to get PageGate to send WCTP messages to one of our internally-developed servers on our LAN. Our server listens on port 50100. When I use this port, I see "Program Halted. Database error: 3219 Invalid operation in Procedure: SendWCTP". This error disappears when I use port 80 for WCTP.

Any ideas?

Thanks,

Taylor

Tech Support,

I am trying the same thing -- to pull incoming email from a gmail account. In the post above did you mean POP_Port for the key name? Also, gmail uses SSL. Does this matter? I have already tried adding this to the registry, but no luck. The log just says "POP collection started for myusername@gmail.com@pop.gmail.com", "Disconnected from server"

Thanks,

Taylor

Author	Message
Topic: SMTP->WCTP: how to prepend a string to the payload
Taylor Replies: 2 Views: 10088	Forum: PageGate Support Posted: Fri Mar 25, 2011 10:14 am Subject: SMTP->WCTP: how to prepend a string to the payload
Taylor Replies: 2 Views: 10088	Thank you!
Topic: SMTP->WCTP: how to prepend a string to the payload
Taylor Replies: 2 Views: 10088	Forum: PageGate Support Posted: Fri Mar 25, 2011 9:36 am Subject: SMTP->WCTP: how to prepend a string to the payload
Taylor Replies: 2 Views: 10088	I am getting a message via GetMail. I need to prepend a string of characters to the payload before/when it is sent out to the carrier via WCTP. Is this possible? Thanks, Taylor
Topic: POP Port
Taylor Replies: 9 Views: 20876	Forum: PageGate Support Posted: Mon Mar 21, 2011 9:22 am Subject: POP Port
Taylor Replies: 9 Views: 20876	Thanks for your help. I used fastmail (domain fastmail.fm), and it works great. I bought the 4.99/yr account that supports POP3 w/ no SSL. Now just need help w/ getting WCTP sent to a port other than 80 (my other post) and NotePage will solve a big problem for us. Taylor
Topic: Database error 3219 & WCTP Port 50100
Taylor Replies: 10 Views: 24943	Forum: PageGate Support Posted: Fri Mar 18, 2011 9:45 pm Subject: Database error 3219 & WCTP Port 50100
Taylor Replies: 10 Views: 24943	Hi Aaron, Tried that too. No luck. I am running Wireshark and am monitoring the traffic on the PC PageGate is on. Is is all going to port 80 of the destination. The only time it doesn't is when I pick port 50100, when I get the database error. Thanks again, Taylor
Topic: Database error 3219 & WCTP Port 50100
Taylor Replies: 10 Views: 24943	Forum: PageGate Support Posted: Fri Mar 18, 2011 8:09 pm Subject: Database error 3219 & WCTP Port 50100
Taylor Replies: 10 Views: 24943	Hi Aaron, I believe so. I went to PageGate Admin, and under Connectors/Connector1, I stopped it and then started it again. Is this correct? I also restarted the PC and then monitored the traffic. It still appears to be going port 80, even though I experimented with assigning the WCTP port to 7777. Thanks for your help! Taylor
Topic: Database error 3219 & WCTP Port 50100
Taylor Replies: 10 Views: 24943	Forum: PageGate Support Posted: Fri Mar 18, 2011 4:34 pm Subject: Database error 3219 & WCTP Port 50100
Taylor Replies: 10 Views: 24943	I continued to experiment with other ports. I tried port 7777, and no longer saw this behavior in the log file. However, I did notice that the traffic from PageGate was sent to port 80. It appears that the selection of 7777 was ignored.
Topic: Database error 3219 & WCTP Port 50100
Taylor Replies: 10 Views: 24943	Forum: PageGate Support Posted: Fri Mar 18, 2011 3:25 pm Subject: Database error 3219 & WCTP Port 50100
Taylor Replies: 10 Views: 24943	We ran a packet capture on port 80, and saw traffic arrive at our from PageGate server. However, when we tried port 50100 for WCTP, nothing. Log follows. Port 80 is already being used for other purposes. 3/18/2011 4:08:06 PM ======================================== 3/18/2011 4:08:06 PM Start connection to carrier: VDS 3/18/2011 4:08:06 PM Send using WCTP protocol 3/18/2011 4:08:06 PM Program Halted. Database error: 3219 Invalid operation. in Procedure: SendWCTP 3/18/2011 4:08:06 PM Module Stopped 3/18/2011 4:08:09 PM Module Started 3/18/2011 4:08:12 PM Time synchronized with scheduler 3/18/2011 4:08:16 PM ======================================== 3/18/2011 4:08:16 PM Start connection to carrier: VDS 3/18/2011 4:08:16 PM Send using WCTP protocol 3/18/2011 4:08:16 PM Program Halted. Database error: 3219 Invalid operation. in Procedure: SendWCTP 3/18/2011 4:08:16 PM Module Stopped 3/18/2011 4:08:20 PM Module Started
Topic: Database error 3219 & WCTP Port 50100
Taylor Replies: 10 Views: 24943	Forum: PageGate Support Posted: Fri Mar 18, 2011 7:40 am Subject: Database error 3219 & WCTP Port 50100
Taylor Replies: 10 Views: 24943	I am doing some testing, and I am trying to get PageGate to send WCTP messages to one of our internally-developed servers on our LAN. Our server listens on port 50100. When I use this port, I see "Program Halted. Database error: 3219 Invalid operation in Procedure: SendWCTP". This error disappears when I use port 80 for WCTP. Any ideas? Thanks, Taylor
Topic: POP Port
Taylor Replies: 9 Views: 20876	Forum: PageGate Support Posted: Fri Mar 18, 2011 6:14 am Subject: POP Port
Taylor Replies: 9 Views: 20876	Tech Support, I am trying the same thing -- to pull incoming email from a gmail account. In the post above did you mean POP_Port for the key name? Also, gmail uses SSL. Does this matter? I have already tried adding this to the registry, but no luck. The log just says "POP collection started for myusername@gmail.com@pop.gmail.com", "Disconnected from server" Thanks, Taylor