NotePage, Inc. Forum Index

Search found 6 matches
NotePage, Inc. Forum Index
Author Message
  Topic: Adding AT command for GSM modem
Prosperon

Replies: 13
Views: 51979

PostForum: NotePager Pro Support   Posted: Fri Nov 06, 2015 12:01 pm   Subject: Adding AT command for GSM modem
Hi,

The response is:

AT
<OK>
AT+CFUN=1
<OK>
AT+CNMI=2,1,0,1,0
<OK>
AT+CSQ
<+CSQ: 16,81>
AT+CMGF=1
<OK>
AT+CMGS="PhoneNumber"
<ERROR>

Unable to proceed >
Enter the text of a message to be delivered, then press enter.
Ctrl+Z
  Topic: Adding AT command for GSM modem
Prosperon

Replies: 13
Views: 51979

PostForum: NotePager Pro Support   Posted: Fri Nov 06, 2015 11:12 am   Subject: Adding AT command for GSM modem
I have confirmed in the Zoom software that the device is registered and the signal strength is good enough.

this is confirmed by the fact you can send a message successfully from within the Zoom application, which is installed on the same server (its a Hyper-V VM)
  Topic: Adding AT command for GSM modem
Prosperon

Replies: 13
Views: 51979

PostForum: NotePager Pro Support   Posted: Fri Nov 06, 2015 10:50 am   Subject: Adding AT command for GSM modem
Hi again,

Still not working. I have gone back to Zoom support to determine if any additional AT commands are required, but if anyone is aware I would appreciate assistance as this is preventing us sending SMS alerts from SolarWinds currently.

06/11/2015 14:42:07 ========================================
06/11/2015 14:42:07 Start connection to carrier: O2
06/11/2015 14:42:07 Connect using GSMAT protocol
06/11/2015 14:42:07 Setting communication parameters
06/11/2015 14:42:08 Attempting to reset modem
06/11/2015 14:42:08 Sent:AT<CR>
06/11/2015 14:42:09 Received:<CR><LF>OK<CR><LF>
06/11/2015 14:42:09 Modem reset
06/11/2015 14:42:09 Attempting to send carrier init string
06/11/2015 14:42:09 Sent:AT+CFUN=1<CR>
06/11/2015 14:42:10 Received:<CR><LF>OK<CR><LF>
06/11/2015 14:42:10 Carrier init string sent
06/11/2015 14:42:10 Sent:AT+CMGF=1<CR>
06/11/2015 14:42:11 Received:<CR><LF>OK<CR><LF>
06/11/2015 14:42:11 Text delivery mode entered
06/11/2015 14:42:11 ----------------------------------------
06/11/2015 14:42:11 Working on message to: <RecipientName> from: administrator
06/11/2015 14:42:11 Formatting message
06/11/2015 14:42:11 Message contained in a single packet
06/11/2015 14:42:11 Sending packet
06/11/2015 14:42:11 Sent:AT+CMGS="07xxxxxxx"<CR>
06/11/2015 14:42:14 Received:<CR><LF>ERROR<CR><LF>
06/11/2015 14:42:14 Sent:administrator:test<SUB>

thanks
  Topic: Adding AT command for GSM modem
Prosperon

Replies: 13
Views: 51979

PostForum: NotePager Pro Support   Posted: Fri Nov 06, 2015 6:35 am   Subject: Adding AT command for GSM modem
Hi

Thanks for your responses first of all.

I was confused as to the inclusion of the CNMI command, so I will be testing without this first and see if just the reset command will allow the CMGS command to be accepted.
  Topic: Adding AT command for GSM modem
Prosperon

Replies: 13
Views: 51979

PostForum: NotePager Pro Support   Posted: Wed Nov 04, 2015 9:45 am   Subject: Adding AT command for GSM modem
Hi

Thanks for the quick response.

We are using NotePager Pro and not Pagegate. I see there is a carrier Init string entry, but not connector.

thanks
  Topic: Adding AT command for GSM modem
Prosperon

Replies: 13
Views: 51979

PostForum: NotePager Pro Support   Posted: Wed Nov 04, 2015 9:06 am   Subject: Adding AT command for GSM modem
Hi,

I am trying to configure Notepage to utilise a Zoom 4595 GSM USB dongle, but am having issues:

1. Notepage can see it and communicate with the modem, but errors when sending the SMS
2. The following is the activity from a Terminal session within Putty to the 4595 device (< indicates a command passed and > indicates the return value):
< AT <ENTER>
>OK
<AT+CMGF=1 <ENTER>
>OK
AT+CMGS="0712312312" <ENTER>
>ERROR
3. I have been informed by Zoom support I need to add the following AT commands before the SMS AT command:
AT+CFUN=1 (power on)
AT+CNMI=2,1,0,1,0 (New Messages Indication to TE)

Can someone help with how this can be applied please.

thanks
 
Page 1 of 1
All times are GMT - 5 Hours
Jump to:  


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin