NotePage, Inc. Forum Index

Search found 5 matches
NotePage, Inc. Forum Index
Author Message
  Topic: Email to SMS in Standalone Environment.
PingMonster

Replies: 3
Views: 5565

PostForum: PageGate Support   Posted: Sun Apr 19, 2015 6:18 pm   Subject: Email to SMS in Standalone Environment.
@ Tech Support.

They are not. But routable.
PowerIQ = 172.22.10.x
PageGate = 172.22.14.x
  Topic: Email to SMS in Standalone Environment.
PingMonster

Replies: 3
Views: 5565

PostForum: PageGate Support   Posted: Thu Apr 16, 2015 6:35 pm   Subject: Email to SMS in Standalone Environment.
Hi..
How or would it be possible to have PageGate PC to receive an email and send as SMS in a closed and standalone environment?

We have PowerIQ server (CentOS) managing and monitoring PDUs and have a standalone workstation access PowerIQ server for status of PDUs.

Above environment has no Internet access nor internal/external DNS server. (None of devices are configured for DNS)

ps. PowerIQ only sends alert as email.

So, how would I go about configuring PageGate, which will be installed on standalone workstation to receive an email from PowerIQ server to send as SMS to my mobile when there is an alert triggered in PDUs.


Regards
  Topic: PagaGate with MultiTech MTCBA-H5-EN2
PingMonster

Replies: 4
Views: 6450

PostForum: PageGate Support   Posted: Wed Apr 15, 2015 10:48 pm   Subject: PagaGate with MultiTech MTCBA-H5-EN2
@OzCom..

I got this working now....I thought I knew things but I should read more and carefully....

The manual was saying the SOLID GREEN light on "LS" was NO transmitting.
And I should have double checked the SIM.

I changed to normal SIM and bang....I got the messages....


One question I have is for OzCom is.....
If the SIM is secured (PIN locked) would it have worked?
Would I have to put some kind of AT string to unlock before Notepage can send it?

Regards
  Topic: PagaGate with MultiTech MTCBA-H5-EN2
PingMonster

Replies: 4
Views: 6450

PostForum: PageGate Support   Posted: Wed Apr 15, 2015 8:47 pm   Subject: PagaGate with MultiTech MTCBA-H5-EN2
@OzCom
Thanks you for that and I have done that too.
I do get "OK" via COM4 (Virtual serial port) but not via COM1 (physical port)
but that fine, we will not be using physical serial port. (Server and the Mulititech modem is too far from each other.

Just to give more info.....I also put "AT+CSQ" and I get "+CSQ: 12,1"
But this is intermittent. Sometimes I get the above result and sometimes I get "ERROR"

Is this mean I have a faulty modem?

Regards
  Topic: PagaGate with MultiTech MTCBA-H5-EN2
PingMonster

Replies: 4
Views: 6450

PostForum: PageGate Support   Posted: Tue Apr 14, 2015 11:42 pm   Subject: PagaGate with MultiTech MTCBA-H5-EN2
HI...
Just wondering if anyone got Pagegate working with MTCBA-H5-EN2.

I have Australian Telstra SIM in MTCBA-H5-EN2 and Pagagate v7.0.
No matter what I do, I could not get the Pagegate to detect the serial port so I have installed HW Virtual Serial Port installed and configured.
YES, this one does get detected.

I have simple setup just to do some testing via Telstra GSM-AT and connector1 as AT+CSQ with Serial port 4.

And this what I get....in connector1 log
Start connection to carrier: Telstra
Connect using GSM protocol
Setting communication parameters (115200,n,8,1)
Attempting to reset modem
Sent:AT<CR>
Attempting to reset modem
Sent:AT<CR>
Attempting to reset modem
Sent:AT<CR>
Attempting to hang up modem
Sent:AT<CR>
Attempting to hang up modem
Sent:AT<CR>
Attempting to hang up modem
Sent:AT<CR>
Carrier retry limit reached. Marking pending messages as bad
FAILED Stn:0 To:test Frm:Notepage Msg:test
 
Page 1 of 1
All times are GMT - 5 Hours
Jump to:  


Powered by phpBB © 2001, 2002 phpBB Group
Theme created by Vjacheslav Trushkin