Search found 5 matches

It's a manual option at the moment but if you want, you could specify a dedicated carrier for one connector or the other to force it to send SMS as you want.

Can you give us a bit of information about the 5% scenarios?

So the 5% is basically we have this one app which passes info out to some employee phones, because of the info they want it all to come from one phone number.. i can have it run a script/exe with it appending the phone#, and msg (I've tested it with smtp using powershell and it works but it goes from both numbers.. )

To double check, are you currently using anything in the 'Dedicated Carrier' value for either connector?

To check, open PG Admin and go to Connectors - Connector # - Settings.

Neither connector is set to dedicated carrier.

I have two connectors setup, with one carrier..so for 95% of the emails this works great.
The other 5% I want to be able to send a text from one or the other of the connector specifically.
It's be great if their was a powershell module or something similar.. or even a pagegate cli that I could do this with.

I've had several issues in the past few months where our rcell 100s get disconnected from the isp. Not so much disconnected but the isp says it's connected and messages are being accepted.. but are never sent, and the cell provider says they never receive.
So with email we do a path flow test.
I was hoping to do a similar where every hr? It would send a text to its own number and either write in a txt file with successful and the time.. or something and I'd feed that into splunk.
I do have getascii and filter licenses.
Any ideas/suggestions on this?
And considering the way some of these providers are throttling/pausing service it may be a good idea...

So basically I have 2 connectors (2 rcell 100s) it works I can text my phone as well as a dozen others successfully.
Now it's in production, and some end users are saying they don't receive a txt (mainly verizon phones). I look through the logs it says successful. I'm wondering if I need to increase the intermediate delay. Or something.
The sim card in the rcells are verizon as well.
If it's successful does that mean it's verified that it's been received by the end user? Or by the ISP? Is their a way to have a read or receive notification?

Protocol: GSM-AT-IP
Host: xxx.x.x.x
Port: 5000
Init String: AT+CSQ
Max Chars: 160

Advanced
Failover: (none)
Username: xxxxx
Password: ******************
Priority: 100
Msg Limit: 0
Max PIN Length: 0

Template
StripNonPrintable = True
InterMessageDelay = 1500
SubjectSearchLength = 0

Author	Message
Topic: Sending txt via specific connector
Kyleweir@lehighcounty.org Replies: 5 Views: 121976	Forum: PageGate Support Posted: Fri Mar 21, 2025 5:31 pm Subject: Sending txt via specific connector
Kyleweir@lehighcounty.org Replies: 5 Views: 121976	It's a manual option at the moment but if you want, you could specify a dedicated carrier for one connector or the other to force it to send SMS as you want. Can you give us a bit of information about the 5% scenarios? So the 5% is basically we have this one app which passes info out to some employee phones, because of the info they want it all to come from one phone number.. i can have it run a script/exe with it appending the phone#, and msg (I've tested it with smtp using powershell and it works but it goes from both numbers.. )
Topic: Sending txt via specific connector
Kyleweir@lehighcounty.org Replies: 5 Views: 121976	Forum: PageGate Support Posted: Fri Mar 21, 2025 12:05 pm Subject: Sending txt via specific connector
Kyleweir@lehighcounty.org Replies: 5 Views: 121976	To double check, are you currently using anything in the 'Dedicated Carrier' value for either connector? To check, open PG Admin and go to Connectors - Connector # - Settings. Neither connector is set to dedicated carrier.
Topic: Sending txt via specific connector
Kyleweir@lehighcounty.org Replies: 5 Views: 121976	Forum: PageGate Support Posted: Fri Mar 21, 2025 9:03 am Subject: Sending txt via specific connector
Kyleweir@lehighcounty.org Replies: 5 Views: 121976	I have two connectors setup, with one carrier..so for 95% of the emails this works great. The other 5% I want to be able to send a text from one or the other of the connector specifically. It's be great if their was a powershell module or something similar.. or even a pagegate cli that I could do this with.
Topic: Texting flow test/monitoring?
Kyleweir@lehighcounty.org Replies: 0 Views: 78749	Forum: PageGate Support Posted: Tue Mar 18, 2025 4:21 pm Subject: Texting flow test/monitoring?
Kyleweir@lehighcounty.org Replies: 0 Views: 78749	I've had several issues in the past few months where our rcell 100s get disconnected from the isp. Not so much disconnected but the isp says it's connected and messages are being accepted.. but are never sent, and the cell provider says they never receive. So with email we do a path flow test. I was hoping to do a similar where every hr? It would send a text to its own number and either write in a txt file with successful and the time.. or something and I'd feed that into splunk. I do have getascii and filter licenses. Any ideas/suggestions on this? And considering the way some of these providers are throttling/pausing service it may be a good idea...
Topic: Gsm-at dialer successful.. but end user says not receiving t
Kyleweir@lehighcounty.org Replies: 1 Views: 82018	Forum: PageGate Support Posted: Sun Dec 15, 2024 12:22 pm Subject: Gsm-at dialer successful.. but end user says not receiving t
Kyleweir@lehighcounty.org Replies: 1 Views: 82018	So basically I have 2 connectors (2 rcell 100s) it works I can text my phone as well as a dozen others successfully. Now it's in production, and some end users are saying they don't receive a txt (mainly verizon phones). I look through the logs it says successful. I'm wondering if I need to increase the intermediate delay. Or something. The sim card in the rcells are verizon as well. If it's successful does that mean it's verified that it's been received by the end user? Or by the ISP? Is their a way to have a read or receive notification? Protocol: GSM-AT-IP Host: xxx.x.x.x Port: 5000 Init String: AT+CSQ Max Chars: 160 Advanced Failover: (none) Username: xxxxx Password: ****************** Priority: 100 Msg Limit: 0 Max PIN Length: 0 Template StripNonPrintable = True InterMessageDelay = 1500 SubjectSearchLength = 0