How do I configure an SMTP Carrier in PageGate?

How do I configure an SMTP Carrier in PageGate?

To set up an SMTP carrier in PageGate, you'd want to do the following:

1) In the PageGate Admin, go to the Connectors section.

2) In the Connectors section, go to Global and under Global go to SMTP.

3) In the Local Domain section, you'd want to input the latter part of your email address, the part after the @ sign.

4) Leave PostMaster blank.

5) For the next section, you may need to contact your network administrator if you're not sure what to do here. Basically, you need to know if you have to relay all of your email through a local server of if you can deliver mail through your DNS. If you can deliver your mail through DNS, find out what your primary and secondary DNS entries are and enter those into DNS Server 1 and DNS Server 2. If you have to use a relay, make sure to put the check mark next to Relay All Mail, then enter in the relay server you were given into the Relay Server box.

6) Click on Apply.

7) Once you've done that, simply right click on Carriers, left click on Add.

8) Name the Carrier SMTP.

9) Set the protocol to SMTP and click on Apply.

Knowledgebase RSS Feed

-