| View previous topic :: View next topic |
| Author |
Message |
Ed Jones
Joined: 16 Aug 2004
Posts: 1
|
 Posted: Mon Aug 16, 2004 11:45 am Post subject: multiple access methods |
 |
|
| In setting up PageGate for the first time, is it possible to use modem, web, and email access methods to run at the same time without any difficulties? Will the standard PageGate package allow this without additional modules? I notice there are check boxes for the various methods but no mention of not being able to use them all if desired.
_________________
PM
|
|
| Back to top |
|
Tech Support
Joined: 25 Aug 2003
Posts: 4354
|
| Posted: Mon Aug 16, 2004 12:05 pm Post subject: multiple access methods |
|
|
If you are asking if PageGate can deliver via modem, and the internet with just the standard single dialer, then the answer is yes. The dialer can alternate between the carrier's delivery methods. All PageGate's supported delivery methods are built in to all versions.
If you are asking if PageGate can accept incoming messages via modem, and the internet, then in this case you will need to purchase the correct interfaces for the types of messages you will be accepting (i.e. GetTAP, GetWeb, GetMail, etc.) |
|
| Back to top |
|
|
