How To Configure NotePager Pro to use SMTP

[Tech Support]

Below are steps that we recommend, in order to send messages using NotePager Pro and SMTP.

1.) 'Add' a Carrier named "SMTP".
2.) Select SMTP as the protocol.
3.) Enter a Local Domain. This needs to look something like "xyz.com" or "abc.net".
4.) Select "Deliver Directly to Destination Server"
5.) Make sure there is at least one DNS Server IP address listed. This does not include "0.0.0.0", as this is not a valid IP address.
6.) Please ensure you have a 'Sender's Name' under 'Tools' - 'Settings' - 'General'.
The "Sender's Name" cannot contain any spaces. It can contain upper/lowercase letters, numerals, periods, hyphens and underscores.
7.) When you 'Add' or 'Edit' a Recipient, select "SMTP" from the 'Carrier' drop down list.
8.) The 'ID/Pin' field name should change to 'E-Mail To:'
9.) Type in the e-mail address for the Recipient's Cell Phone. For AT&T this will be "10digitphonenumber@mobile.att.net".

A list of other Carrier SMTP Domains can be found here: http://www.notepage.net/smtp.htm

After you apply the changes, you should be able to send messages to the SMTP (e-mail) Recipients, as long as you are connected to the Internet. SMTP requires a connection to the Internet for it to work.